In this paper, a novel 4H-SiC split heterojunction gate double trench metal-oxide-semiconductor field-effect transistor (SHG-DTMOS) is proposed to improve switching speed and loss. The device modifies the split gate double trench MOSFET (SG-DTMOS) by changing the N+ polysilicon split gate to the P+ polysilicon split gate. It has two separate P+ shielding regions under the gate to use the P+ split polysilicon gate as a heterojunction body diode and prevent reverse leakage `current. The static and most dynamic characteristics of the SHG-DTMOS are almost like those of the SG-DTMOS. However, the reverse recovery charge is improved by 65.83% and 73.45%, and the switching loss is improved by 54.84% and 44.98%, respectively, compared with the conventional double trench MOSFET (Con-DTMOS) and SG-DTMOS owing to the heterojunction.
17 February 2022 in Semiconductor Science and Technology
In this study, we investigated a 4H-SiC deep source trench metal-oxide semiconductor field-effect transistor (DST-MOSFET) using technology computer-aided design numerical simulations. The proposed DST-MOSFET comprises a P-pillar formed along with the DST and a side P+ shielding region (SPR), which replaces the gate trench bottom SPR. Owing to the superjunction generated by the P-pillar and N-drift region, the static characteristics of the DST-MOSFET were superior to those of the trench gate MOSFET (UMOSFET) and double-trench MOSFET (DT-MOSFET). The specific on-resistance and Baliga’s figure of merit of DST-MOSFET improved by 9% and 104%, respectively, in comparison with those of UMOSFET; and by 37% and 64%, respectively, compared to those of DT-MOSFET. Additionally, the SPR reduced the gate-to-drain capacitance of the DST-MOSFET and improved the switching characteristics. Consequently, the total switching energy loss of the proposed DST-MOSFET reduced by 63% and 47% in comparison with those of the UMOSFET and DT-MOSFET, respectively.
In this paper, we compare the static and switching characteristics of the 4H-SiC conventional UMOSFET (C-UMOSFET), double trench MOSFET (DT-MOSFET) and source trench MOSFET (ST-MOSFET) through TCAD simulation. In particular, the effect of the trenched source region and the gate trench bottom P+ shielding region on the capacitance is analyzed, and the dynamic characteristics of the three structures are compared. The input capacitance is almost identical in all three structures. On the other hand, the reverse transfer capacitance of DT-MOSFET and ST-MOSFET is reduced by 44% and 24%, respectively, compared to C-UMOSFET. Since the reverse transfer capacitance of DT-MOSFET and ST-MOSFET is superior to that of C-UMOSFET, it improves high frequency figure of merit (HF-FOM: RON-SP × QGD). The HF-FOM of DT-MOSFET and ST-MOSFET is 289 mΩ∙nC, 224 mΩ∙nC, respectively, which is improved by 26% and 42% compared to C-UMOSFET. The switching speed of DT-MOSFET and ST-MOSFET are maintained at the same level as the C-UMOSFET. The switching energy loss and power loss of the DT-MOSFET and ST-MOSFET are slightly improved compared to C-UMOSFET.