Ferroelectric materials are interesting candidates for future photovoltaic applications due to their potential to overcome the fundamental limits of conventional single bandgap semiconductor-based solar cells. Although a more efficient charge separation and above bandgap photovoltages are advantageous in these materials, tailoring their photovoltaic response using ferroelectric functionalities remains puzzling. Here we address this issue by reporting a clear hysteretic character of the photovoltaic effect as a function of electric field and its dependence on the poling history. Furthermore, we obtain insight into light induced nonequilibrium charge carrier dynamics in Bi2FeCrO6 films involving not only charge generation, but also recombination processes. At the ferroelectric remanence, light is able to electrically depolarize the films with remanent and transient effects as evidenced by electrical and piezoresponse force microscopy (PFM) measurements. The hysteretic nature of the photovoltaic response and its nonlinear character at larger light intensities can be used to optimize the photovoltaic performance of future ferroelectric-based solar cells.
20 March 2014 in Journal of Materials Science: Materials in Electronics
We report on the junction magnetoresistance in magnetic tunnel junctions of the hard–soft type with magnetic layers separated by a ZnS barrier. The hard magnetic bottom electrode consists of an artificial antiferromagnetic structure in which the rigidity is ensured by the antiferromagnetic exchange coupling between two FeCo layers through a Ru spacer layer. The samples were grown by sputtering on Si (111) wafers at room temperature and have the following structure: The square tunnel elements, with lateral sizes of 10, 20, 50, and 100μm, exhibit typical tunnel resistance of 2–3 kΩ μm2 and nonlinear zero field current–voltage variation. The most interesting result is the observation of junction magnetoresistance of about 5% at room temperature with a 2 nm thick ZnS barrier.
In this work, we studied inverted organic solar cells based on bulk heterojunction using poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C71-butyric acid methyl ester (P3HT:PCBM) as an active layer and a novel cathode buffer bilayer consisting of tin dioxide (SnO2) combined with polyethylenimine-ethoxylated (PEIE) to overcome the limitations of the single cathode buffer layer. The combination of SnO2 with PEIE is a promising approach that improves the charge carrier collection and reduces the recombination. The efficient device, which is prepared with a cathode buffer bilayer of 20 nm SnO2 combined with 10 nm PEIE, achieved Jsc = 7.86 mA/cm2, Voc = 574 mV and PCE = 2.84%. The obtained results exceed the performances of reference solar cell using only a single cathode layer of either SnO2 or PEIE.
We present structural and magnetic properties of three sets of structures: as-deposited films cosputtered at 900 K on substrates with a buffer layer and films deposited by molecular beam epitaxy directly on substrates at 900 K, as prepared and annealed at 900 K. All layers have the tetragonal structure. The chemical long-range ordering for the as-deposited films is incomplete in contrast with the annealed films, where long-range order is the highest. The structural study of these films grown on has pointed out that three variants of the phase coexist. The proportion of and variants, with the concentration modulation along a vector oriented at 45° with respect to the growth direction, is higher than the proportion of the variant with the concentration modulation within the plane. The magnetic study shows an in-plane easy magnetization axis with a large magnetic anisotropy. This is interesting for the magnetic recording media with classical longitudinal writing and reading heads. The simulation of the magnetization loops confirms that the easy magnetization axis is within the plane and along the direction, favored by the dominant and variants.
The quality of a tunnel barrier deposited by pulsed laser deposition on is investigated. Epitaxy and two-dimensional growth are obtained and the root-mean-square roughness is . The distribution of the local current measured by conductive atomic force microscopy indicates that hot spots are almost absent. The standard deviation of the barrier thickness distribution is lower than . Current-voltage characteristics of patterned magnetic tunnel junctions provide evidence of the high quality of the barrier. The electrical properties of the barrier are at least as good as the ones obtained by sputtering or e-beam evaporation.