The zeolitic imidazolate framework-8 (ZIF-8)-derived Fe-N/C catalysts show excellent oxygen reduction reactions (ORR) performance, but the harsh synthesis conditions and low yields have greatly limited their commercialization. Herein, we report an electrochemical-assisted polymerization method to produce a Fe-N/C structure (EC-Fe-N/C) with a high surface area (954.583 m2 g−1), high dispersion of Fe (2.2 wt %), and abundant N (2.05 wt %). The hierarchical structure exhibits excellent ORR activity (half-wave potential 0.88 V, in alkaline media) and outstanding zinc-air battery performance (energy density 821.3 mAh g−1 Zn, specific capacity 1017.1 Wh kg−1 Zn). This work may provide a simple and effective strategy to rationally design the Fe-N/C porous structure for highly efficient ORR activity.
The fundamental understanding of the mechanism underlying the early stages of crystallization of hexagonal-close-packed (hcp) nanocrystals is crucial for their synthesis with desired properties, but it remains a significant challenge. Here, we report using in situ liquid cell transmission electron microscopy (TEM) to directly capture the dynamic nucleation process and track the real-time growth pathway of hcp Ni nanocrystals at the atomic scale. It is demonstrated that the growth of amorphous-phase-mediated hcp Ni nanocrystals is from the metal-rich liquid phases. In addition, the reshaped preatomic facet development of a single nanocrystal is also imaged. Theoretical calculations further identify the non-classical features of hcp Ni crystallization. These discoveries could enrich the nucleation and growth model theory and provide useful information for the rational design of synthesis pathways of hcp nanocrystals.
4 March 2021 in The Journal of Physical Chemistry Letters
China Low Activation Martensitic (CLAM) steel has been developed at Institute of Nuclear Energy Safety Technology under wide collaboration. Fabrication techniques for test blanket modules (TBMs) are being developed, and a 1/3 scale prototype is being fabricated. A 1/3 scale first wall (FW) mockup was fabricated by a one-step hot isostatic pressing (HIP) method with CLAM steel rectangular tubes and plates. Two cover plates and type L cooling plates were produced with strips and grooved plates using electron beam welding (EB) and HIP diffusion bonding. Also, the assembly routine of the FW cover plates and cooling plates and four back plates were pre-tested using solid plates. And, the FW, cooling plate and cover plates were non-destructively tested using dimensional measurements and ultrasonic wave tests, which showed preliminarily the feasibility of the fabrication process.