In this study, we further develop the processing of ground-based interferometric radar measurements for the application of bridge monitoring. Applying ground-based radar in such complex setups or long measurement durations requires advanced processing steps to receive accurate measurements. These steps involve removing external influences from the measurement and evaluating the measurement uncertainty during processing. External influences include disturbances caused by objects moving through the signal, static clutter from additional scatterers, and changes in atmospheric properties. After removing these influences, the line-of-sight displacement vectors, measured by multiple ground-based radars, are decomposed into three-dimensional displacement components. The advanced processing steps are applied exemplarily on measurements with two sensors at a prestressed concrete bridge near Coburg (Germany). The external influences are successfully removed, and two components of the three-dimensional displacement vector are determined. A measurement uncertainty of less than 0.1 mm is achieved for the discussed application.

Against the background of an aging infrastructure, the condition assessment process of existing bridges is becoming an ever more challenging task for structural engineers. Short-term measurements and structural monitoring are valuable tools that can lead to a more accurate assessment of the remaining service life of structures. In this context, contactless sensors have great potential, as a wide range of applications can already be covered with relatively little effort and without having to interrupt traffic. In particular, profile scanning and microwave interferometry, have become increasingly important in the research field of bridge measurement and monitoring in recent years. In contrast to other contactless displacement sensors, both technologies enable a spatially distributed detection of absolute structural displacements. In addition, their high sampling rate enables the detection of the dynamic structural behaviour. This paper analyses the two sensor types in detail and discusses their advantages and disadvantages for the deformation monitoring of bridges. It focuses on a conceptual comparison between the two technologies and then discusses the main challenges related to their application in real-world structures in operation, highlighting the respective limitations of both sensors. The findings are illustrated with measurement results at a railway bridge in operation.

Assessing the condition of bridge infrastructure requires estimating damage-sensitive features from reliable sensor data. This study proposes to estimate natural frequencies from displacement measurements of a ground-based interferometric radar (GBR). These frequencies are determined from the damped vibration after each vehicle crossing with least squares and compared to a Frequency Domain Decomposition result. We successfully applied the approach in an exemplary measurement campaign at a bridge near Coburg (Germany) with an additional comparison to commonly used strain sensors. Since temperature greatly influences natural frequencies, linear regression is used to correct this influence. A simulation shows that GBR, combined with the least squares approach, achieves the lowest uncertainty and variation in the linear regression, indicating better damage detection results. However, the success of the damage detection highly depends on correctly determining the temperature influence, which might vary throughout the structure. Future work should further investigate the biases and variability of this influence.

Remote sensors such as ground-based interferometric radar (GBR) are increasingly applied in bridge monitoring to determine damage-sensitive features. A crucial part of successfully determining these features is the removal of multiple influences, which can cause inaccurate measurements. This study highlights two aspects, which predominantly determine the measurement accuracy: clutter estimation and the projection from measurements in line of sight (LOS) to a Cartesian coordinate system. Furthermore, the removal of these influences can also introduce additional uncertainty, which is rarely considered. The uncertainty is estimated exemplarily for measurements at a railway bridge in Karlsruhe (Germany) and compared to the results of measurements from a terrestrial laser scanner (TLS). Without consideration of this uncertainty, the GBR would compare favorably to the TLS even though both sensors achieve a similar measurement uncertainty in the order of 0.1–0.3 mm. Our approach for uncertainty estimation could be further developed with a simulation of the signal footprint to approximate its size better.

In this paper, we introduce a non-invasive approach for monitoring bridge infrastructure with ground-based interferometric radar. This approach is called the mirror mode, since it utilises the flat surface of the bridge underside as a mirror to reflect the signal to a corner reflector on the ground placed opposite of the radar sensor. For proving the feasibility of this approach, a measurement campaign has been carried out at an exemplary bridge in Karlsruhe (Germany) including a radar sensor in mirror mode, a second radar sensor in the default mode and a laser profile scanner. We investigate the potential of this approach to monitor the bridge displacement in vertical direction and compare the results with the two other sensors. The derived results reveal the potential for monitoring bridge infrastructure. Finally, we propose further research aspects of this approach to analyse its capabilities and limitation in the context of non-invasive infrastructure monitoring.