Francesca Villa

Dr. Francesca Villa


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 July 2021 in Materials
Verified
Journal Article
Open access
PDF file
FVFrancesca Villa
Francesca Villa
ANAdelaide Nespoli
Adelaide Nespoli
FPFrancesca Passaretti
Francesca Passaretti
Elena VillaElena Villa
Elena Villa
Among NiTi-based alloys, one of the most promising and exploited alloys is NiTiCu, since the addition of Cu in substitution of Ni in the binary equiatomic NiTi has a significant influence on the martensitic transformation and the thermomechanical properties of the system. A high content of Cu improves the damping properties at the expense of phase homogeneity and workability. The present study focuses on an alloy with a high copper content, i.e., 20 at.%. For this specific composition, the correlation between the thermal treatments, microstructure, formation of secondary phases, and damping properties are investigated by several analyses. The microscopic observation, together with the compositional analysis, allowed the determination of four different phases in the alloy. Both the calorimetry and dynamic thermo mechanical measurements, which confirmed the high damping ability of the alloy, provided a characterization of the martensitic transition. Finally, the electron backscatter diffraction (EBSD) analysis detected the different crystallographic structures (i.e., cubic austenite, orthorhombic martensite, and cubic (face-centered) NiTi2) and their orientation in the different phases. Therefore, the present work aims to improve the knowledge of the role of secondary phases in the optimization of the NiTiCu20 alloy as a valuable alternative to typical alloys used for damping purposes.

11 March 2021 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
FVFrancesca Villa
Francesca Villa
EVElena Villa
Elena Villa
ANAdelaide Nespoli
Adelaide Nespoli
FPFrancesca Passaretti
Francesca Passaretti

28 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
FVFrancesca Villa
Francesca Villa
ANAdelaide Nespoli
Adelaide Nespoli
CFCarlo Fanciulli
Carlo Fanciulli
FPFrancesca Passaretti
Francesca Passaretti
Elena VillaElena Villa
Elena Villa
The present work focused on the microstructural, thermal, electrical, and damping characterization of NiMnGa samples produced through a powder pressing and a sintering process; the effect of sintering times and of the starting powder size were evaluated. Moreover, an observation of the evolution of martensitic transformation typical of NiMnGa ferromagnetic shape memory alloy was conducted in comparison with the cast material behavior and in correlation with the material densification. The optimum powder size and sintering time for the process, i.e., 50 µm or lower and 72 h, were identified considering the investigated physical properties of the sintered samples in comparison to the cast material. The corresponding sample showed the best compromise between density, thermal and electrical properties, and damping and functional behaviour. In general, the outcomes of this study could be the basis of a useful tool for production processes that include a sintering step as well as being a starting point for the evaluation of an alternative low cost fabrication method of this alloy.

10 September 2025 in Nanomaterials
Verified
Journal Article
Open access
PDF file
FAFilippo Agresti
Filippo Agresti
Giuliano AngellaGiuliano Angella
Giuliano Angella
HAHumaira ARSHAD
Humaira ARSHAD
SBSimona Barison
Simona Barison
Davide BarrecaDavide Barreca
Davide Barreca
Maria  LosurdoMaria Losurdo
Maria Losurdo
The sustainable production of energy without environmental footprints is a challenge of paramount importance to satisfy the ever-increasing global demand and to promote economic and social growth through a greener perspective. Such awareness has significantly stimulated worldwide efforts aimed at exploring various energy paths and sources, in compliance with the ever more stringent environmental regulations. Research advancements in these fields are directly dependent on the design, fabrication, and implementation of tailored multi-materials for efficient energy production and harvesting and storage devices. Herein, we aim at providing a survey on the ongoing research activities related to various aspects of functional materials for energy production, conversion, and storage. In particular, we present the opportunities and the main open challenges related to multifunctional materials spanning from carbon-based nanostructures for chemical energy conversion, ferroelectric ceramics for energy harvesting, and phase change materials for thermal energy storage to metallic materials for hydrogen technologies, heat exchangers for wind energy, and amphiphobic coatings for the protection of solar panels. The relevance of designing tailored materials for power generation is also presented. Finally, the importance of applying life cycle assessment to materials is emphasized through the case study of AlTiN thin films.

13 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
FVFrancesca Villa
Francesca Villa
EBEmanuele Bestetti
Emanuele Bestetti
RFRoberto Frigerio
Roberto Frigerio
MCMichele Caimi
Michele Caimi
CTCorrado Tomasi
Corrado Tomasi
Elena VillaElena Villa
Elena Villa
Shape memory alloys (SMAs) and ferromagnetic shape memory alloys (FeSMAs) have recently attracted interest for solid state refrigeration applications. Among NiMnGa-based quaternary systems, NiMnGaCu exhibits an interesting giant magnetocaloric effect thanks to the overlapping of the temperatures related to the magnetic transition and the thermoelastic martensitic transformation (TMT); in particular, for compositions with Cu content of approximately 6 at%. In the present work, we investigated the improvement effect of TMT on the total entropy change (ΔS) in the elastocaloric performances of polycrystalline Ni50Mn18.5Cu6.5Ga25 at% alloy samples, just above room temperature. We report an extensive calorimetric and thermomechanical characterization to explore correlations between microstructural properties induced by the selected thermal treatment and elastocaloric response, aiming at providing the basis to develop more efficient materials based on this quaternary system. Both ΔT and ΔS values obtained from mechanical curves at different temperatures and strain recovery tests under fixed load vs. T were considered. Maximum values of ΔS = 55.9 J/KgK and ΔT = 4.5 K were attained with, respectively, a stress of 65 MPa and strain of 4%. The evaluation of the coefficient of performance (COP) was carried out from a cyclic test.

2 August 2021 in Smart Materials and Structures
Verified
Journal Article
Closed access
FVFrancesca Villa
Francesca Villa
EBE Bassani
E Bassani
FPFrancesca Passaretti
Francesca Passaretti
GCG de Ceglia
G de Ceglia
SVS Viscuso
S Viscuso
Elena VillaElena Villa
Elena Villa
Thanks to their functional properties, NiTi and NiTi-based shape memory alloys (SMAs) exhibit both pseudo-elastic and intrinsic damping ability finding applications in several fields. The use of these alloys in damping devices or systems allows the attenuation of different kinds of vibration such as noise or more intense oscillations. In this work, the damping behaviour of different NiTi semifinished products has been evaluated by means of dynamic thermomechanical measurements in order to have a preliminary indication for the integration of these SMA elements in damper demonstrators. The evolution of the internal friction parameter with respect to temperature, frequency and strain extent is evaluated. Moreover, some possible demonstrators’ concepts, i.e. a cladding panel, some dampers and a shock absorber, are proposed and characterized. The investigated SMA elements are a plain-woven mesh made of NiTi and steel thin wires, wave-shaped NiTi ribbons and NiTi single-turn wave springs. The elements have been thermally treated in order to achieve the required shapes and thermomechanical conditions. The perspectives and potential of these semifinished products in the field of damper devices are investigated by a preliminary characterization and discussed.