Electrochemical supercapacitors are a promising type of energy storage device with broad application prospects. Developing an accurate model to reflect their actual working characteristics is of great research significance for rational utilization, performance optimization, and system simulation of supercapacitors. This paper presents the fundamental working principle and applications of supercapacitors, analyzes their aging mechanism, summarizes existing supercapacitor models, and evaluates the characteristics and application scope of each model. By examining the current state and limitations of supercapacitor modeling research, this paper identifies future development trends and research focuses in this area.

Emerging trends and advances in techniques in power electronics, Unified Power Quality Conditioner (UPQC) has a superior performance compared to other methods. The paper proposes the application of a ANN based UPQC to enhance the power quality of a three-phase Low-voltage network connected to a hybrid distribution generation (DG) system. The proposed work emphases the detailed performance analysis of a distributed generation system that integrates a solar PV and wind energy system by utilizing Unified Power Quality Conditioner (UPQC) with an artificial neural network (ANN) controller with respect to proportional-integral (PI) controller. The core objective of the proposed ANN is to offer good steady and dynamic state performance compared to the PID controller. The system called UPQC-ANN-RE feeds energy generated by a photovoltaic array and a wind turbine into the electrical grid and loads attached to a system of 3-phase 4-wire electrical distribution. In addition to inserting active/real power in the utility grid, the system of UPQC-ANN-RE functions as a UPQC, improving power quality signs e.g., voltage and current harmonics and power factor. A detailed analysis of the active-real power flow by converters is carried out to allow a good understanding of the operation of the UPQC-ANN-RE. The simulation outcomes are presented to assess the dynamic and steady state performance of the system of UPQC-ANN-RE connected to an electrical distribution system and to compare the consequences with the PI controller.

The popularity of the internet, smartphones, and social networks has contributed to the proliferation of misleading information like fake news and fake reviews on news blogs, online newspapers, and e-commerce applications. Fake news has a worldwide impact and potential to change political scenarios, deceive people into increasing product sales, defaming politicians or celebrities, and misguiding visitors to stop visiting a place or country. Therefore, it is vital to find automatic methods to detect fake news online. In several past studies, the focus was the English language, but the resource-poor languages have been completely ignored because of the scarcity of labeled corpus. In this study, we investigate this issue in the Urdu language. Our contribution is threefold. First, we design an annotated corpus of Urdu news articles for the fake news detection tasks. Second, we explore three individual machine learning models to detect fake news. Third, we use five ensemble learning methods to ensemble the base-predictors’ predictions to improve the fake news detection system’s overall performance. Our experiment results on two Urdu news corpora show the superiority of ensemble models over individual machine learning models. Three performance metrics balanced accuracy, the area under the curve, and mean absolute error used to find that Ensemble Selection and Vote models outperform the other machine learning and ensemble learning models.

High precision demands in a large number of emerging robotic applications strengthened the role of the modern control laws in the position control of the Permanent Magnet Synchronous Motor (PMSM) servo system. This paper proposes a learning-based adaptive control approach to improve the PMSM position tracking in the presence of the friction uncertainty. In contrast to most of the reported works considering the servos operating at high speeds, this paper focuses on low speeds in which the friction stemmed deteriorations become more obvious. In this paper firstly, a servo model involving the Stribeck friction dynamics is formulated, and the unknown friction parameters are identified by a genetic algorithm from the offline data. Then, a feedforward controller is designed to inject the friction information into the loop and eliminate it before causing performance degradations. Since the friction is a kind of disturbance and leads to uncertainties having time-varying characters, an Adaptive Proportional Derivative (APD) type Iterative Learning Controller (ILC) named as the APD-ILC is designed to mitigate the friction effects. Finally, the proposed control approach is simulated in MATLAB/Simulink environment and it is compared with the conventional Proportional Integral Derivative (PID) controller, Proportional ILC (P-ILC), and Proportional Derivative ILC (PD-ILC) algorithms. The results confirm that the proposed APD-ILC significantly lessens the effects of the friction and thus noticeably improves the control performance in the low speeds of the PMSM.

The efficient operation of power-electronic-based systems heavily relies on the reliability and longevity of battery-powered systems. An accurate prediction of the remaining useful life (RUL) of batteries is essential for their effective maintenance, reliability, and safety. However, traditional RUL prediction methods and deep learning-based approaches face challenges in managing battery degradation processes, such as achieving robust prediction performance, to ensure scalability and computational efficiency. There is a need to develop adaptable models that can generalize across different battery types that operate in diverse operational environments. To solve these issues, this research work proposes a TransRUL model to enhance battery RUL prediction. The proposed model incorporates advanced approaches of a time series transformer using a dual encoder with integration positional encoding and multi-head attention. This research utilized data collected by the Centre for Advanced Life Cycle Engineering (CALCE) on CS_2-type lithium-ion batteries that spanned four groups that used a sliding window technique to generate features and labels. The experimental results demonstrate that TransRUL obtained superior performance as compared with other methods in terms of the following evaluation metrics: mean absolute error (MAE), root-mean-squared error (RMSE), and $R^2$ values. The efficient computational power of the TransRUL model will facilitate the real-time prediction of the RUL, which is vital for power-electronic-based appliances. This research highlights the potential of the TransRUL model, which significantly enhances the accuracy of battery RUL prediction and additionally improves the management and control of battery-based systems.

This work presents a distributed generation system (DG) that combines system of a wind turbine (WT) and photovoltaic (PV) using a unified power quality conditioner (UPQC). Along with providing active power (AP) to the utility grid, Wind‐PV‐UPQC improves PQ indicators, for example, voltage drops/surges, harmonics of grid voltages, and PF. Since Wind‐PV‐UPQC depends on dual compensation scheme, the parallel converter works as a sinusoidal voltage source, while the series converter works as a sinusoidal current source. In this way, a smooth transition from grid operation to island operation and vice versa can be achieved without load voltage transitions. In addition, in order to overcome the problems through abrupt solar radiation or wind speed variations, a faster power balance is achieved between the wind turbines, the PV array, and the grid, as FFCL pursue the production of the current references of series converter. Consequently, the dynamic reactions of the converter currents and the voltage of dc bus are enhanced. A comprehensive analysis of flow of the AP through the converters is done to ensure a proper understanding of how Wind‐PV‐UPQC works. Finally, the simulation results are shown to estimate the dynamic and static performance of Wind‐PV‐UPQC in conjunction with the power distribution system.