Stoichiometric acetylene-oxygen mixtures diluted by argon are widely used in normal detonation waves but have not yet been used in oblique detonation waves (ODWs). The present study simulates ODWs in acetylene-oxygen-argon mixtures, with a dilution ratio Φ = 50%-90%, using the reactive Euler equations with a detailed chemistry model, and describes the characteristics of acetylene ODWs. Similar to ODWs in hydrogen-air mixtures, the transition from the oblique shock wave to ODW may be either abrupt or smooth and the effects of Φ are investigated with a variable incident Mach number M0. When M0 changes between 8 and 10, the transition is abrupt in the case of Φ = 50%, while it is smooth in the case of Φ = 90%. In the case of Φ = 70%, a high M0 corresponds to a smooth transition, while a low M0 corresponds to an abrupt transition. A further study on the initiation mechanism was performed by comparing the numerical initiation length with the length obtained via the constant-volume combustion calculation, which demonstrated that the initiation is kinetic-controlled in the cases of Φ = 70% and 90%, but wave-controlled in the case of Φ = 50% with M0 below 8.5. Moreover, an initiation structure featured by two-shock in the product was observed for the first time, and its formation mechanism is qualitatively discussed and compared to hydrogen ODWs.
16 October 2023 in Journal of Computational Science
This study proposes a new formulation for the Harten, Lax, and van Leer (HLL) type Riemann solver which is capable of solving contact discontinuities accurately but with robustness for strong shock. It is well known that the original HLL, which has incomplete wave structures, is too dissipative to capture contact discontinuities accurately. On the other side, contact-capturing approximate Riemann solvers such as HLL with Contact (HLLC) usually suffer from spurious solutions, also called carbuncle phenomenon, for strong shock. In this work, a new accurate and robust HLL-type formulation, the so-called HLL-BVD (HLL Riemann solver with boundary variation diminishing) is proposed by modifying the original HLL with the BVD algorithm. Instead of explicitly recovering the complete wave structures like the way of HLLC, the proposed method restores the missing contact with a jump-like function. The capability of solving contact discontinuities is further improved by minimizing the inherent dissipation term in HLL. Without modifying the original incomplete wave structures of HLL, the robustness for strong shock has been reserved. Thus, the proposed method is free from the shock instability problem. The accuracy and robustness of the new method are demonstrated through solving several one- and two-dimensional tests. Results indicate that the new formulation based on the two-wave HLL-type Riemann solver is not only capable of capturing contact waves more accurately than the original HLL or HLLC but, most importantly, is free form carbuncle instability for strong shock.