Graphene has been regarded as a potential application material in the field of new energy conversion and storage because of its unique two-dimensional structure and excellent physical and chemical properties. However, traditional graphene preparation methods are complicated in-process and difficult to form patterned structures. In recent years, laser-induced graphene (LIG) technology has received a large amount of attention from scholars and has a wide range of applications in supercapacitors, batteries, sensors, air filters, water treatment, etc. In this paper, we summarized a variety of preparation methods for graphene. The effects of laser processing parameters, laser type, precursor materials, and process atmosphere on the properties of the prepared LIG were reviewed. Then, two strategies for large-scale production of LIG were briefly described. We also discussed the wide applications of LIG in the fields of signal sensing, environmental protection, and energy storage. Finally, we briefly outlined the future trends of this research direction.

The advancement of plant phenomics by using optical imaging-based phenotyping techniques has markedly improved breeding and crop management. However, there remains a challenge in increasing the spatial resolution and accuracy due to their noncontact measurement mode. Wearable sensors, an emerging data collection tool, present a promising solution to address these challenges. By using a contact measurement mode, wearable sensors enable in-situ monitoring of plant phenotypes and their surrounding environments. Although a few pioneering works have been reported in monitoring plant growth and microclimate, the utilization of wearable sensors in plant phenotyping has yet reach its full potential. This review aims to systematically examine the progress of wearable sensors in monitoring plant phenotypes and the environment from an interdisciplinary perspective, including materials science, signal communication, manufacturing technology, and plant physiology. Additionally, this review discusses the challenges and future directions of wearable sensors in the field of plant phenotyping.

Wearable sensors have demonstrated wide applications from medical treatment, health monitoring to real-time tracking, human-machine interface, smart home, and motion capture because of the capability of in situ and online monitoring. Data acquisition is extremely important for wearable sensors, including modules of probes, signal conditioning, and analog-to-digital conversion. However, signal conditioning, analog-to-digital conversion, and data transmission have received less attention than probes, especially flexible sensing materials, in research on wearable sensors. Here, as a supplement, this paper systematically reviews the recent progress of characteristics, applications, and optimizations of transistor amplifiers and typical filters in signal conditioning, and mainstream analog-to-digital conversion strategies. Moreover, possible research directions on the data acquisition of wearable sensors are discussed at the end of the paper.

On‐skin sensors can precisely perceive important electrophysiological signals, including electroencephalogram (EEG), electrocardiogram (ECG), and electromyogram (EMG). Despite significant advances in the development of soft materials as electrode sensors, data acquisition (DAQ) unit—another indispensable component of on‐skin electronic sensory systems—typically exhibits bulkiness or unimodal sensing, which is detrimental to the portability of the sensory system or the comprehensiveness of the perceived information. Here, a portable and multimodal DAQ unit to tackle these challenges is designed. By assembling the DAQ unit with low‐impedance (<100 Ω) laser‐induced graphene on‐skin electrode sensors, a wireless communication module, a power supply module, and a 3D printed protective shell, the completed sensory system can realize three‐in‐one monitoring of EEG, ECG, and EMG with a light weight of 22 g and a low cost of $25. Moreover, a mobile App is developed to display the perceived electrophysiological signals in real time. Human–machine interface and embedded machine learning are demonstrated using the designed sensory system, indicating its potential applications in artificial intelligence. The success of this inexpensive three‐in‐one portable electronic sensory system sheds light on design, fabrication, and commercialization of multifunctional wearable electronics with wide applications in fitness tracking, medical diagnostics, and human–machine interface.