Significance: Data-driven approaches have launched a new paradigm in scientific research that is bound to have an impact on all disciplines of science and engineering. However, at this juncture, the exploration of data-driven techniques in the century-old field of fracture mechanics is highly limited, and there are key challenges including accurate and intelligent knowledge extraction and transfer in a data-limited regime. Here, we propose a framework for data-driven knowledge extraction in fracture mechanics with rigorous accuracy assessment which employs active learning for optimizing data usage and for data-driven knowledge transfer that allows efficient treatment of three-dimensional fracture problems based on two-dimensional solutions.
Mechanical testing of materials at the microscales is challenging. It requires delicate procedures not only for producing and handling the specimen to be tested, but also for applying an accurate and controlled force. This endeavor is even more challenging when it comes to investigating the behavior of brittle materials such as glass. Here, we present a microtensile tester for investigating silica glass polymorphs. The instrument is entirely made of silica and for which the same femtosecond laser is not only used for fabricating the device, but also for operating it (loading the specimen) as well as for performing in situ measurements. As a proof-of-concept, we present a stress-strain curve of fused silica for unprecedented high tensile stress of 2.4 GPa, as well as preliminary results of the elastic modulus of femtosecond laser-affected zones of fused silica, providing new insights on their microstructures and mechanical behavior.
Traces of heavy metals found in water resources, due to mining activities and e-waste discharge, pose a global threat. Conventional treatment processes fail to remove toxic heavy metals, such as lead, from drinking water in a resource-efficient manner when their initial concentrations are low. Here, we show that by using the yeast Saccharomyces cerevisiae we can effectively remove trace lead from water via a rapid mass transfer process, called biosorption, achieving an uptake of up to 12 mg lead per gram of biomass in solutions with initial lead concentrations below 1 part per million. Through spectroscopic analyses, we found that the yeast cell wall plays a crucial role in this process, with its mannoproteins and β-glucans being the key potential lead adsorbents. Furthermore, by employing nanomechanical characterization in the yeast biomass, we discovered that biosorption is linked to an increase in cell wall stiffness. These findings open new opportunities for using environmentally friendly and abundant biomaterials for advanced water treatment targeting emerging contaminants.
Over 350 million metric tons of plastic waste are generated annually, with most ending up in landfills, dumps, or the environment, posing significant risks. Mechanical recycling remains underutilized, largely due to the high variability in the mechanical properties of recycled plastics (recyclates). This variability undermines performance reliability and hinders the adoption of recyclates in demanding industrial applications. Inspired by natural materials, known for their mechanical robustness despite microstructural stochasticity, we propose a universal, chemistry-agnostic, brick-and-mortar design tailored for recycled polymers. In this design, stiff recycled plastic platelets (bricks) are embedded in a soft virgin polymer matrix (mortar), which accommodates deformation and redistributes stress. To predict the effective modulus, strength, and property variability of such structures, we developed an uncertainty-aware tension-shear-chain model, combining Monte Carlo simulations with literature-based distributions of recyclates’ stiffness and conservative interfacial parameter stochasticity assumptions. We validated our model using nacre-inspired composites fabricated from recycled high-density polyethylene (rHDPE) platelets and polydimethylsiloxane (PDMS) mortar. The experimental results matched model predictions, confirming significant suppression of variability. In a case study on industrial HDPE stretch film, our design reduced modulus variability by up to 93% and maximum permissible strain variability by at least 68% compared to input rHDPE, while matching the modulus of virgin HDPE film. This work introduces a design-enabled variability-suppression strategy for recycled plastics, able to transform highly heterogenous materials into structurally robust products. By supporting virgin-plastic substitution and circular design strategies, our approach can enable the broader adoption of recyclates by several industries.