This paper presents an innovative design of a system of cages for an open-sea aquaculture. The concept is based on an existing successful concept of a system, which is flexible, submersible, and has a single point mooring. The new design, besides being much larger, presents a new concept of stabilizing the system at the submerged state. This new system is preliminarily designed by a simplified method, and then analyzed by the AQUASIM finite elements software system. The results of the nonlinear hydroelastic analysis confirm that the preliminary design by simplified calculations is adequate to the design conditions. The new concept of stabilizing the system at the submerged state is studied by simulations of four configurations, where the optimal is selected. The simulations show that the cages always retain above 70% of the volume. The paper presents valuable information of a practical design, such as the method of the analysis, the environmental design criteria, the scantlings of the structure, and the obtained usage factors at extreme sea conditions. The system was recently being constructed, launched, and anchored at open-sea offshore Ashdod. It is now tested at the sea before cultivation of fishes.
The concept of Modular Floating Structures (MFS) presents a unique alternative to increase the available land resources in the adjacent marine environment of coastal cities. It offers a sustainable technological adaptation that can help mitigate overdevelopment and urban growth limitations. This study examines the comfort range of a suburban offshore MFS module, by using a novel methodology that reconciles residential comfort criteria with seakeeping. The investigation is performed by characterising the hydrodynamic structural response and analysing its compatibility for offshore dwellings. It is demonstrated that the MFS module complies to marine regulations, including seakeeping and comfort, but when evaluating its hydrodynamic response to the accepted accelerations in residential buildings, it reaches performance limits at a certain sea state. This may influence the choice of environment, based on the allowable significant wave height, or call for better hydrodynamic performance using multi-body configuration.
1 May 2006 in Journal of Waterway, Port, Coastal, and Ocean Engineering
An approximate analytical assessment of long wave development due to nonlinear shoaling is obtained and verified against wave-flume experiments. The phase averaged equation for the nonlinear evolution of shoaling waves by Agnon and Sheremet serves as a starting point. Their shoaling interaction function J is significantly simplified through the mild slope assumption. Results, which may be used to assess the long wave input for engineering applications such as harbor resonance studies, are given.
This paper describes a procedure for designing flexible aquaculture structures at open sea. The procedure is demonstrated through the design of an innovative system for offshore aquaculture. The paper demonstrates how an understanding of the wave kinematics with respect to structural design yields a simple design method, which results with a product that meets the functional requirements and is capable of surviving violent sea conditions. Furthermore, the paper presents a novel and successful concept of an offshore aquaculture structure. The presented aquaculture system functions successfully since 2006, offshore the eastern coast of the Mediterranean Sea and survives extreme storms where several other concepts failed.
A Very Large Floating Structure (VLFS) is a promising concept for the utilisation of the sea. Currently, VLFSs are classified into two broad categories: the pontoon-type, limited to sheltered water, and the semi-submersible type, for open-ocean. We present a new concept, the delta-type, an important feature of which is the formation of a sheltered basin, providing accessibility in most weather conditions. Initiating the development of this concept, we study its hydrodynamic aspects: basin efficiency, motion, comfort and mooring. We present a case study, for which we compare the hydrodynamic aspects for four configurations of equal utilisation areas. The agitation in the basin and the motion are solved linearly for regular and irregular seas. A single-point mooring system is designed and solved in the time-domain, considering the second-order slow-drift motion that is critical to the mooring loads. We obtained promising results that justify the next stage of the study – structural aspects.