Key Laboratory of Microelectronic Devices & Integrated Technology, Institute of Microelectronics (IME), Chinese Academy of Sciences (CAS), Beijing 100029, China
Prof. Dr. Mengmeng Li
Key Laboratory of Microelectronic Devices & Integrated Technology, Institute of Microelectronics (IME), Chinese Academy of Sciences (CAS), Beijing 100029, China
This work reports on a passive double spiral microfluidic device allowing rapid and label-free tumor cell separation and enrichment from diluted peripheral whole blood, by exploiting the size-dependent hydrodynamic forces. A numerical model is developed to simulate the Dean flow inside the curved geometry and to track the particle/cell trajectories, which is validated against the experimental observations and serves as a theoretical foundation for optimizing the operating conditions. Results from separating tumor cells (MCF-7 and Hela) spiked into whole blood indicate that 92.28% of blood cells and 96.77% of tumor cells are collected at the inner and the middle outlet, respectively, with 88.5% tumor recovery rate at a throughput of 3.33 × 107 cells min−1. We expect that this label-free microfluidic platform, driven by purely hydrodynamic forces, would have an impact on fundamental and clinical studies of circulating tumor cells.
26 June 2018 in Journal of the American Chemical Society
Polymorphism of organic semiconducting materials exerts critical effects on their physical properties such as optical absorption, emission and electrical conductivity, and provides an excellent platform for investigating structure–property relations. It is, however, challenging to efficiently tune the polymorphism of conjugated polymers in aggregated, semi-crystalline phases due to their conformational freedom and anisotropic nature. Here, two distinctly different semi-crystalline polymorphs (β1 and β2) of a low-bandgap diketopyrrolopyrrole polymer are formed through controlling the solvent quality, as evidenced by spectroscopic, structural, thermal and charge transport studies. Compared to β1, the β2 polymorph exhibits a lower optical band gap, an enhanced photoluminescence, a reduced π-stacking distance, a higher hole mobility in field-effect transistors and improved photocurrent generation in polymer solar cells. The β1 and β2 polymorphs provide insights into the control of polymer self-organization for plastic electronics and hold potential for developing programmable ink formulations for next-generation electronic devices.
In this work, we propose a rapid and continuous rare tumor cell separation based on hydrodynamic effects in a label-free manner. The competition between the inertial lift force and Dean drag force inside a double spiral microchannel results in the size-based cell separation of large tumor cells and small blood cells. The mechanism of hydrodynamic separation in curved microchannel was investigated by a numerical model. Experiments with binary mixture of 5- and 15-μm-diameter polystyrene particles using the double spiral channel showed a separation purity of more than 95% at the flow rate above 30 ml/h. High throughput (2.5 × 108 cells/min) and efficient cell separation (more than 90%) of spiked HeLa cells and 20 × diluted blood cells was also achieved by the double spiral channel.
In this paper, we report a quick approach to self-assemble three-dimensional (3D) spongiform nanofiber stacks via electrospinning, which usually fabricates 2D non-woven fiber mats. Through controlling experimental conditions, cone-like polystyrene fiber stacks can be self-assembled on aluminum foil within 30 min. The stacks are able to reach a height of more than 10 cm. Moreover, conversion between the 3D fiber stack and 2D thin film can be controlled. The formation mechanism of the self-assembled fiber stacks and the influence of experimental conditions have also been explored. The 3D fiber stacks may be promising for applications in many fields such as tissue engineering, electrodes of battery, and filtration, etc.