Assessment of the nitrogen (N) inputs and outputs in croplands would help effectively manage the distribution of N to improve crop growth and environmental sustainability. To better understand the N flow of the main cereal systems in China, soil N balance, N use efficiency (NUE), N losses and the potential environmental impacts of maize, wheat and rice cropping systems were estimated at the regional and national scales from 2004 to 2018. Nationally, the soil N balance (N inputs—N outputs) of maize, wheat, single rice and double rice decreased by 28.8%,13.3%, 30.8% and 34.1% from 2004–2008 to 2014–2018, equivalent to an average of 33.3 to 23.7 kg N ha⁻¹, 82.4 to 71.4 kg N ha⁻¹, 93.6 to 64.8 kg N ha⁻¹ and 51.8 to 34.1 kg N ha⁻¹, respectively. The highest soil N balance were observed in Southeast (SE) region for maize and double rice, North central (NC) region for wheat single rice and Northwest region for wheat, whereas Northeast (NE) region had the lowest N balance for all crops. The NUE increased from 49.8%, 41.2%, 49.7% and 53.7% in 2004–2008 to 54.8%, 45.9%, 55.5% and 56.5% in 2014–2018 for maize, wheat, single rice and double rice, respectively. The fertilizer N losses (i.e., N₂O emission, NO emission, N₂ emission, NH₃ volatilization, N leaching and N runoff) were estimated as 43.7%, 38.3%, 40.2% and 36.6% of the total N inputs for maize, wheat, single rice and double rice, respectively in 2014–2018. Additionally, the highest global warming potential and acidification effects were found in NE and NC regions for maize, NC region for wheat, the middle and lower reaches of Yangtze River for single rice and SE region for double rice, respectively. The highest risk of water contamination by N leaching and surface runoff was observed in NC region for all crops mainly due to high N fertilizer input. Furthermore, the dynamics of N balance for all crops were closely tied with grain yields, except for single rice, the N balance of which was mainly correlated with N fertilizer input. Our results could help researchers and policy makers effectively establish optimized fertilization strategies and adjust the regional allocation of grain cropping areas in response to environmental risks and climate change caused by food crop cultivation in China.

The utilization of crop straw resources has been highly emphasized by governments and academia in recent decades. The growing importance of straw decomposition in the wheat-maize rotation system and the remarkable diversity of accumulated information on this topic inspired us to quantitatively explore variations in the outcomes of individual studies. We conducted a data analysis of 46 experimental studies reporting the effects of agronomic measures on the straw decomposition rates of wheat (14 studies) and maize (38 studies). Statistical results showed that maize straw crushed and buried in soil with turn-over or rotary tillage can significantly increase straw decomposition rates. Further, with the increase in nitrogen input and straw burial depth in the soil, the maize straw decomposition rate increased significantly, while the amount of straw return showed the opposite trend. Among all agronomic measures in this research, burial depth has demonstrated a significant positive effect on the wheat straw decomposition rate. The random forest analysis identified decomposition time as the most important predictor of straw decomposition rates for wheat and maize. In addition, some agronomic measures and straw decomposition time jointly affect the decomposition rate of straw. In general, agronomic measures are effective factors in controlling straw decomposition in a wheat-maize rotation system.

Biodegradable mulch film (BDM) residues in farmland have attracted extensive concern due to their low degradation rate in soil after the service period. However, different reactions of the bacterial and fungal communities to LDPEM and BDM residues have been confusing. A pot experiment was implemented to explore the influences of 0.5% and 2.0% (w/w) LDPEM and BDM residues on soil physicochemical properties and bacterial and fungal communities in the present study. The results indicated that BDM residues significantly increased soil pH and SOC to an increasing degree under the treatment with a higher mulch film residue amount, while LDPEM residues did not. The dissimilarities of the bacterial community between the treatment groups and the control ranged from 0.24 to 0.27, while the dissimilarities of the fungal community were higher, with the variation ranging from 0.43 to 0.46. Higher variations in the internal correlation coefficient were observed in the fungal community than in the bacterial community under the treatment groups. In addition, the modules of the bacterial community network increased from 2 to 3 under the BDM 0.5% and BDM 2.0%. Comparatively, the treatments with BDM residues doubled the modules of the fungal community network from 2 to 4. Structural equation modelling indicated that mulch film residues had a higher negative direct effect on fungal community structure (−0.752) than on bacterial community structure (−0.600). However, soil physicochemical properties had no significant influences on either bacterial or fungal communities. Overall, soil fungi respond more violently to mulch film residues than bacteria do.

Coagulation can effectively recover substances from wastewater; however, there is a lack of efficient coagulants for simultaneous recovery of organic matter, nitrogen, and phosphorus. We prepared a composite polysilicate metal (CSM) flocculant by combining Fe³⁺ and Mg²⁺ ions in polysilicic acid (PSiA). According to the results of scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR), the CSM exhibited a larger amorphous phase along with new compounds, including Mg₃Fe₂(SiO₄)₃ and hydroxyl metals. The CSM demonstrated a higher coagulation efficiency than PSiA and polymeric ferric sulfate, particularly for PO₄³⁻-P and NH₄⁺-N removal. The metal/silicate molar ratio substantially influenced the structure and composition of the CSM, along with the coagulation efficiency, with an optimal ratio of 3:1. Additionally, we proposed a novel preparation strategy to achieve an optimum CSM basicity (B*) for coagulation by adjusting the initial pH of PSiA (pH_Initial) without adding an alkali agent. The results demonstrated that the optimum B* can be obtained by adjusting pH_Initial to 0.5 or 1. The overall optimum coagulation performance for the simultaneous removal of organic matter, PO₄³⁻P, and NH₄⁺-N from wastewater was 68.5%, 99%, and 17.5%, respectively. This study provides a feasible approach for synchronous pollutant recovery from wastewater.

To examine the safety of producing edible rapeseed in heavy-metal-contaminated farmland, field experiments were performed with 25 varieties of edible rapeseed on farmland lightly polluted with Cd in the central southern part of Hunan Province. Growing characteristics and Cd contents in rapeseed tissues were measured, and Cd uptake, translocation and removal potential were calculated. The results showed that the growth of 25 rapeseed varieties was not inhibited without withering or inconsistent changes in the shoot. The shoot and root Cd contents of rapeseed varieties ranged from 0.05 to 0.26 mg·kg⁻¹ and 0.04 to 0.26 mg·kg⁻¹, respectively. The bioaccumulation factor (BCF) showed that the shoot had a greater capacity for Cd transport than roots. The total Cd removed by rapeseed varieties ranged from 1.606 to 16.159 μg·plant⁻¹. There were significant differences in plant height, BCF of soil available Cd in the shoot, translocation factor (TCF) of Cd from root to shoot and Cd intake by rapeseed among the edible rapeseed varieties. Cluster analysis of Cd accumulation in the 25 rapeseed varieties indicated that Lvjin 1, Guanyou Qingjing and Guanyou brassica not only reduced soil pollution but also allowed for the production of safe leafy rapeseed, although Cd contents in the shoot of 25 rapeseed varieties did not exceed the national safety standards of China.