In this paper, an internal central single‐cracked disk (ICSCD) specimen was proposed for the study of dynamic fracture initiation toughness of sandstone under blasting loading. The ICSCD specimen had a diameter of 400 mm sandstone disc with a 60 mm long crack. Blasting tests were conducted by using the ICSCD specimens. The blasting strain‐time curve was obtained from the radial strain gauges placed around the blast hole. The fracture initiation time was determined by circumferential strain gauges placed around the crack tip. The stress history on the blast hole of the sandstone specimen was then derived from measured strain curve through the Laplace transform. The numerical solutions were further obtained by the numerical inversion method. A numerical model was established using the finite element software ANSYS. The type I dynamic stress intensity factor curves of sandstone under blasting loading were derived by the mutual interaction integration method. The results showed that (1) the ICSCD specimen can be used to measure dynamic initiation fracture toughness of rocks; (2) the stress on the blast hole wall can be obtained by the Laplace numerical inversion method; (3) the dynamic initiation fracture toughness of the ICSCD sandstone specimen can be calculated by the experimental‐numerical method with a maximum error of only 7%.
2 August 2015 in Advances in Materials Science and Engineering
A mixed failure criterion, which combined the modified maximum principal stress criterion with the damage model of tensile crack softening, was developed to simulate crack propagation of rock under blasting loads. In order to validate the proposed model, a set of blasting models with a crack and a borehole with different incident angles with the crack were established. By using this model, the property of crack propagation was investigated. The linear equation of state (EOS) was used for rock, and the JWL EOS was applied to the explosive. In order to validate the numerical simulation results, experiments by using PMMA (polymethyl methacrylate) with a crack and a borehole were carried out. The charge structure and incident angle of the blasting experimental model were the same as those in the numerical models. The experiment results agree with the numerical simulation results.