The electrically pumped ultraviolet (UV) random lasing in -axis oriented ZnO polycrystalline films has been demonstrated. For this demonstration, a metal-oxide-semiconductor structure of film was fabricated on a silicon substrate. With ever-higher forward bias where the negative voltage was connected to the silicon substrate, the UV electroluminescence from such a ZnO-based device transformed from the spontaneous emission to the random lasing in the ZnO film. It is believed that the recurrent scattering and interference of the enough strong electroluminescent UV light in the in-plane random cavities formed in the ZnO film leads to electrically pumped UV random lasing.
Nominally undoped ZnO films were deposited by reactive sputtering on the lightly boron-doped and heavily boron-doped silicon substrates. The sputtered ZnO films were identified to be highly ⟨002⟩ oriented in crystallinity and type in electrical conductivity. The current-voltage characteristics revealed that the heterojunction exhibited well-defined rectifying behavior while the heterojunction did not possess rectifying function. As for the heterojunction, it was electroluminescent to a certain extent in the visible region under sufficient forward bias with the positive voltage on the silicon substrate, while it emitted ultraviolet light characteristics of near-band-edge emission of ZnO under the reverse bias, which significantly dominated the visible emission. In contrast to the heterojunction, the heterojunction did not exhibit detectable electroluminescence (EL) under either forward or reverse bias. The characteristics and EL mechanism of the above-mentioned heterojunctions have been tentatively explained in terms of the energy-band structures of the heterojunctions.
A sol–gel process and a nanochannel aluminium template were employed to fabricate an orderly array of ZnO nanowires. The ZnO nanowires, with a hexagonal structure, were identified by means of x-ray diffraction and selected-area electron diffraction. The arrays of ZnO nanowires were characterized by scanning electron microscopy. Transmission electron microscopy (TEM) shows that the diameters of the ZnO nanowires are very uniform, at about 60 nm. Furthermore, high-resolution TEM provides lattice images of {100}, {002} and {101} planes in the nanowires, indicating that the nanowires are well crystallized.
Fairly pure ultraviolet (UV) electroluminescence (EL) was realized on a ZnO-based metal-insulator -semiconductor structure on a silicon substrate, which was easily fabricated by the reactive direct current sputtering and electron beam evaporation. The UV EL originated from the near-band-edge (NBE) emission of ZnO was achieved at room temperature when the device was under sufficient forward bias with the negative voltage applied on the silicon substrate. Moreover, the intermediate layer should be thick enough to confine the electrons in the conduction band of ZnO beneath the interface, which is critical for generation of NBE emission from ZnO.
We report the electrically pumped ultraviolet random lasing from ZnO nanorod arrays on Si. Metal-insulator-semiconductor structures in a form of Au/SiO2/ZnO-nanorod-array were fabricated on Si. Such devices exhibit random lasing when the Au electrode is applied with a sufficiently high positive voltage. In this context, in the region adjacent to SiO2/ZnO-nanorod-array interface, stimulated emission from ZnO occurs due to population inversion and, moreover, light is scattered by the nanorods and SiO2 films. Therefore, random lasing proceeds due to optical gain achieved by the stimulated emission and multiple scattering.