Laboratory of Separation and Reaction Engineering, Chemical Engineering Department, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, S/N, 4099-002 Porto, Portugal
Dr. Mohsen Karimi
Laboratory of Separation and Reaction Engineering, Chemical Engineering Department, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, S/N, 4099-002 Porto, Portugal
The development of adsorption-based technologies for CO2 capture in the post-combustion processes requires finding materials with high capacity of adsorption and low cost of preparation. In this study, the modification of a commercial activated carbon (Norit ROX 0.8), considered as a solid adsorbent for CO2 capture, and the effects of different methods of activations, chemically (hydrogen peroxide, sulphuric acid, nitric acid and urea) and thermally (at 800 ºC) on adsorption performance have been investigated. Then, CO2 adsorption capacity was studied at different temperatures and pressures to evaluate the effects of various agents on sample performance. The textural properties of the samples were determined using adsorption-desorption isotherms of nitrogen at -196 ºC. Finally, the obtained data were modeled by Response Surface Methodology (RSM) and Langmuir isotherm. The results showed that the prepared sample by successive treatments with nitric acid, urea and thermal calcination has a higher uptake capacity than other modified samples.
1 October 2020 in Journal of Environmental Chemical Engineering
Moving bed reactors (MBRs) have been proposed as a significant progress in the reaction engineering area for performance improving and energy saving. Since its advent in 1890, the MBRs have attracted a wide acceptance in different industries, while it was firstly developed for the drying industries. The progress that this technology has passed during its evolution, introduced these reactors as a pioneer strategy in other industries including: the petroleum, petrochemical, pyrolysis and biomass. In the traditional reaction systems, the process performance decreases during the operational conditions, while MBRs have obviated this drawback by having an all-around permanent acceptable efficiency. In this context, the present work provides an overview on the evolution of MBRs by investigating the main experimental and theoretical studies. In this way, the experimental studies have typically taken into account operational conditions and production rates of different products, while in the theoretical researches, modeling and simulation of conventional processes, the evaluation of novel configurations and the optimization techniques have been investigated. In the end, some suggestions are proposed to modify the traditional MBRs as helpful ideas for further studies.