This review provides a systematic overview of the integration, surface, and interfacial engineering of 2D/3D and 2D/2D homo/heterojunctions for PV and PEC applications.
Photoelectrochemical (PEC) solar-fuel conversion is a promising approach to converting energy from sunlight into storable chemical fuels. The development of low cost, highly efficient, and stable semiconductor-based photoelectrodes is a key step in realizing economically viable PEC energy conversion on a global scale. The p-type Cu-based metal oxides possess a wide range of bandgap values and favorable band edges relative to the water splitting redox couples, thus providing promising candidates for PEC solar conversion applications. However, the improvement of the PEC performance for the binary and ternary copper-based metal oxides is severely hindered by the chemical instability and/or unsatisfactory optoelectronic properties. Thus, a fundamental understanding of the key limitations, improvement strategies, and progress of these materials is critical to design high performance and stable photocathodes. Here, we outline the development of p-type binary and ternary Cu-based metal oxide photocathodes, discuss the merits and major challenges of these p-type materials, and present the latest research effort in modifying the materials towards high-performance photocathodes. The critical strategies that have been successfully employed for Cu2O-based solar cells and photocathodes are emphasized to offer guidelines to advance emerging Cu-based photocathodes. Emphasis is placed on the determination of the faradaic efficiency and onset potential of hydrogen generation for the modified photocathodes to properly evaluate the performance and design tandem devices that achieve bias-free solar water splitting. Furthermore, perspectives regarding emerging issues yet to be addressed for the development of Cu-based metal oxide photocathodes with high photocurrent and photovoltage are also presented.
UV photoresponse of ZnO nanowires is measured in air under different humidity conditions to study the competitive surface effects of oxygen and water vapor. During UV illumination, it was found that the current decreases gradually under high humidity, whereas the current increases under low humidity. In the recovery phase, a change of two to three orders of magnitude in the decay time is observed by varying the humidity. A model that takes into account the solid-state process of photocarrier generation/recombination and the competitive surface effects of oxygen/water is proposed to explain the observed variations in photoresponse under different humidity conditions.
The improved energy band alignment of Pt/TiO2/Ga2O3/Cu2O structure results in a positive onset potential of ∼1 Vvs.RHE and a stable cathodic photocurrent under appropriate TiO2deposition temperature.
A nanowatt UV photoconductive detector made up of ultra-long (approximately 100 microm) ZnO bridging nanowires has been fabricated by a single-step chemical vapor deposition (CVD) process. The electrodes, forming comb-shaped thick ZnO layers, and the sensing elements, consisting of ZnO nanowires bridging the electrodes, were fabricated simultaneously in a single-step CVD process. The device showed drastic changes (10-10(5) times) in current under a wide range of UV irradiances (10(-8)-10(-2) W cm(-2)). Moreover, the detector exhibited fast response (rise and decay times of the order of 1 s) to UV illumination in air, but no response to visible light (hnu<3.2 eV). Our approach provides a simple and cost-effective way to fabricate high-performance 'visible-blind' UV detectors.