Vinay Kumar

Dr. Vinay Kumar

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 January 2023 in Advanced Electronic Materials
Verified
Journal Article
Open access
AJAayush Kumar Jaiswal
Aayush Kumar Jaiswal
VKVinay Kumar
Vinay Kumar
EJElina Jansson
Elina Jansson
OHOlli‐Heikki Huttunen
Olli‐Heikki Huttunen
AYAkio Yamamoto
Akio Yamamoto
MBMohammad H. Behfar
Mohammad H. Behfar
Printed, flexible, and hybrid electronic technologies are advancing rapidly leading to remarkable developments in smart wearables, intelligent textiles, and health monitoring systems. Flexible electronics are typically fabricated on petroleum‐derived polymeric substrates. However, in the light of global environmental concerns regarding fossil raw materials, there is a need to drive the production of flexible electronics devices based on sustainable materials. Additionally, there is a need to reduce the quantity of electronic waste by developing material recovery and recycling technologies. Here, a fully biobased and biodegradable substrate tailored for printed flexible electronic applications is developed. Based on a nanocomposite of cellulose nanofibril (CNF) and hydroxyethyl cellulose (HEC), the substrate shows excellent mechanical and optical properties for printed flexible electronics applications. High‐resolution screen printing of conductive ink and typical electronics assembly processes are possible to realize on the substrate. An electrocardiograph (ECG) device is fabricated on the cellulosic substrate as a technology demonstrator and its performance is confirmed on human volunteers. Last, end‐of‐life scenarios are studied for printed electronic devices where device degradation and subsequent material recovery concepts are presented. This work demonstrates that sustainable plant‐derived materials can play a big role toward a green transition in the electronics industry.

19 November 2020 in Coatings
Verified
Journal Article
Open access
PDF file
VKVinay Kumar
Vinay Kumar
EKEija Kenttä
Eija Kenttä
PAPetter Andersson
Petter Andersson
UFUlla Forsström
Ulla Forsström
Paper-based abrasive products are multilayer structures in which the first layer on the paper substrate is usually a latex barrier coating to prevent the migration of adhesive glue into the substrate. The high coat weight (10 g/m2) of latex barrier layers is a cause of environmental concerns. Hence, alternative materials that can provide the barrier function at lower coat weights are desired. In this work, microfibrillated cellulose (MFC) combined with poly(vinyl) alcohol (PVA) were explored as suitable alternatives to the current latex coatings. Barrier coating formulations containing PVA, MFC, and silica (SiO2) were developed and applied to a paper substrate using a rod coating method on a pilot scale. Coating quality and barrier performance were characterized using scanning electron microscope images, air permeance, surface roughness, water contact angle, KIT test, and oil Cobb measurements. The barrier coatings were also studied for adhesion to the subsequent coating layer. An optimal barrier function was achieved with the developed coatings at a low coat weight of ca. 3 g/m2. The adhesion of pure PVA and PVA-MFC barrier coatings to the subsequent coating layer was inadequate; however, silica addition was found to improve the adhesion.

24 August 2026 in Packaging Technology and Science
Verified
Journal Article
Open access
ELEnni Helena Luoma
Enni Helena Luoma
AJAayush Kumar Jaiswal
Aayush Kumar Jaiswal
VKVinay Kumar
Vinay Kumar
MVMinna Vikman
Minna Vikman
KKKirsi Kataja
Kirsi Kataja
AHAli Harlin
Ali Harlin
As food supply chains are becoming increasingly complex and globalized, they have also become heavily reliant on packaging materials. Most conventional packaging is made from petroleum‐derived plastics which pose significant environmental challenges post use. Therefore, there is an urgent need for high‐performance biobased packaging materials that do not accumulate in the environment. This work investigates the technical feasibility and pilot‐scale processability of a novel packaging solution based on fibrillated cellulose, poly (butylene succinate‐co‐adipate) (PBSA) and paper. A barrier stack consisting of a PBSA‐fibrillated cellulose‐PBSA architecture was developed, which exhibited water vapour transmission rates of < 33 g/(m 2 ·day), excellent oxygen transmission rates of < 5 cm 3 /(m 2 ·day) at 23°C and 50% RH, and good grease barrier (KIT 12). This multilayer structure was used in two formats, (I) as a multilayer film and (II) coated upon a paper substrate. Herein, we report a comprehensive characterization of the produced multilayer structures in terms of physical, mechanical and barrier properties, complemented with soil biodegradation and disintegration studies. Pilot‐scale roll‐to‐roll cast film extrusion, extrusion coating and dispersion coating techniques were used to produce the multilayer structures. The developed structures were readily heat sealable and were converted into demo packages for biscuits and chocolates. The packed foods successfully underwent shelf‐life testing (sensory quality evaluation) of over 9 months. The results presented in this work demonstrate that novel packaging materials built using biobased and biodegradable materials can be produced in pilot‐scale and converted into a functional barrier packaging.

18 September 2019 in Journal of Materials Science
Verified
Journal Article
Closed access
PDF file
CHCamila Honorato
Camila Honorato
VKVinay Kumar
Vinay Kumar
JLJun Liu
Jun Liu
HKHanna Koivula
Hanna Koivula
CXChunlin Xu
Chunlin Xu
MTMartti Toivakka
Martti Toivakka