Nicolae Cofaru

Dr. Nicolae Cofaru

“Lucian Blaga” University, 550024 Sibiu, Romania

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NCNicolae Cofaru
Nicolae Cofaru
Mihai Dan RomanMihai Dan Roman
Mihai Dan Roman
ICIleana Ioana Cofaru
Ileana Ioana Cofaru
VOValentin Oleksik
Valentin Oleksik
SFSorin Radu Fleaca
Sorin Radu Fleaca
This paper provides an analysis from a biomechanical perspective of the medial opening wedge high tibial osteotomy surgery, a medical procedure commonly used in treating knee osteoarthritis. The aim of this research is to improve the analysed surgical strategy by establishing optimal values for several very important parameters for the geometric planning of this type of surgical intervention. The research methods used are numerical and experimental. We used finite element, a numerical method used to study the intraoperative behavior of the CORA area for different positions of the initiation point of the cut of the osteotomy plane and for different correction angles. We also used an experimental method in order to determine the maximum force which causes the occurrence of cracks or microcracks in the CORA area. This helped us to determine the stresses, the maximum forces, and the force-displacement variations in the hinge area, elements that allowed us to identify the optimal geometric parameters for planning the surgery.

11 September 2021 in Journal of Personalized Medicine
Verified
Journal Article
Open access
PDF file
MSMircea Sopon
Mircea Sopon
VOValentin Oleksik
Valentin Oleksik
Mihai Dan RomanMihai Dan Roman
Mihai Dan Roman
NCNicolae Cofaru
Nicolae Cofaru
MOMihaela Oleksik
Mihaela Oleksik
SFSorin Radu Fleaca
Sorin Radu Fleaca
Background and objectives: Osteoporotic spine fractures represent a significant factor for decreasing quality of life in the elderly female population. Understanding the mechanisms involved in producing these fractures can improve their prevention and treatment. This study presents a biomechanical method to produce a vertebral fracture, conducted on a human spine segment, observing the displacements and strains in the intervertebral disc, endplate, and vertebral body. Materials and Methods: We performed two tests, one corresponding to an extension loading, and the second to an axial loading. Results: The maximum displacement in the target vertebral body presented higher values in the case of the extension as compared to the axial strain where it mainly occurred after the fracture was produced. The strains occurred simultaneously on both discs. In the case of the axial strain, due to the occurrence of the fracture, the maximum value was recorded in the spine body, while in the case of the extensions, it occurred in the neural part of the upper disc. The advantage of this method was that the entire study was an experiment, using optical methods, increasing the precision of the material data input. Conclusions: The research method allowed recording in real time of a larger amount of data from the different components of the spine segment. If there was an extension component of the compression force at the moment of the initial loading, part of this load was absorbed by the posterior column with higher mechanical resistance. After the maximum capacity of the absorption was reached, in both situations the behavior was similar.

27 February 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NCNicolae Cofaru
Nicolae Cofaru
VOValentin Oleksik
Valentin Oleksik
ICIleana Ioana Cofaru
Ileana Ioana Cofaru
CSCarmen Mihaela Simion
Carmen Mihaela Simion
Mihai Dan RomanMihai Dan Roman
Mihai Dan Roman
SFSorin Radu Fleaca
Sorin Radu Fleaca
This article presents an experimental approach to the geometrical planning of the medial opening wedge high tibial osteotomy surgery which, as it is known, is an efficient surgical strategy quite widely used in treating knee osteoarthritis. While most of the published papers focus on analyzing this surgery from a medical point of view, we suggest a postoperative experimental evaluation of the intervention from a biomechanical point of view. The geometrical planning and, more specifically, the determination of the point of intersection between the corrected mechanical axis and the medial-lateral articular line of the knee, is a problem quite often debated in literature. This paper aims to experimentally investigate the behavior of the tibia with an open wedge osteotomy fixed with a locking plate, TomoFix (DE Puy Synthes), taking into account two positions of the mechanical axis of the leg on the width of the tibial plateau, measured from medial to lateral at 50% and 62.5% (Fujisawa point), respectively. The variations of the force relative to the deformation, strains, and displacements resulting from the progressive loading of the tibial plateau are studied. The research results reveal that using the Fujisawa point is better for conducting the correction not only for medical reasons, but also from a mechanical point of view.

22 November 2017 in MATEC Web of Conferences
Verified
Journal Article
Open access
PDF file
PVPetre Vasiluta
Petre Vasiluta
NCNicolae Cofaru
Nicolae Cofaru
ICIleana Ioana Cofaru
Ileana Ioana Cofaru
The study shown in this paper presents the behaviour of geomembranes used at the ecological landfills. For this goal was used a method designed to elaborate the virtual models of 3D geomembrane with one ply or 2 plies disposed at 30°, 45° and 90° and based on this model there were developed a number of 20 particular cases. For each situation it was realized the nonlinear analyses for all the developed cases with different vertical pressures representing different loads for the waste layer (1m, 2m, 10m, 15m, 20m). The main results are obtained in graphical form and represent the Maximum tensions Von Mises and total displacements of the geomembrane.

30 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ICIleana Ioana Cofaru
Ileana Ioana Cofaru
MOMihaela Oleksik
Mihaela Oleksik
NCNicolae Cofaru
Nicolae Cofaru
HBHoria Branescu
Horia Branescu
AHAdrian Gheorghe Hasegan
Adrian Gheorghe Hasegan
RDRobert Daniel Dobrotă
Robert Daniel Dobrotă
Opening wedge high tibial osteotomy (OWHTO) is a surgical procedure often used to eliminate the effects of knee osteoarthritis, a disease that is becoming more widespread worldwide. Optimizing the geometric planning of this operation is a very important preparatory step for the success of the intervention and rapid postoperative recovery. This optimization is performed in two main directions. The first direction evaluates the intraoperative behavior of the tibia during the osteotomy by optimizing four geometric parameters that characterize geometric planning. The second direction aims at a postoperative evaluation of the flat tibia-osteosynthesis assembly taking into account the optimal position on the medial–lateral articular line through which the corrected mechanical axis of the tongue passes and implicitly offloads the transfer from the medial area to the side of the knee. The research methods used are exclusively computer-assisted such as: computer-aided design (hereinafter CAD) for geometric modeling of the tibia taking into account the real bone structure, the finite element method (hereinafter FEM) for performing numerical analyses and design of the experiment (hereinafter DOE) for the design of the research. The results obtained are eloquent and clearly presented and can be important elements for orthopedic doctors at the geometric planning stage of the OWHTO.

2 December 2019 in MATEC Web of Conferences
Verified
Journal Article
Open access
PDF file
NCNicolae Cofaru
Nicolae Cofaru
ICIleana Ioana Cofaru
Ileana Ioana Cofaru
Radu Emanuil PetruseRadu Emanuil Petruse
Radu Emanuil Petruse
MRMilan Rackov
Milan Rackov
MBMirko Blagojevic
Mirko Blagojevic
NMNenad Marjanovic
Nenad Marjanovic
In this paper we present a design method for a modular device used in different types of HIGH TIBIAL OSTEOTOMY surgical procedures. The requirements, necessities and functions of this modular device are presented in the first part of the article. An important aspect is the fact that the device must be designed in a manner which permit to use it for all types of HIGH TIBIAL OSTEOTOMY: opening wedge osteotomies, closing wedge osteotomies, medial osteotomies, lateral osteotomies, uniplanar osteotomies or biplanar osteotomies. This fact is possible using modular elements for the main parts of the devices. The researches could be the starting point for others researches regarding the appropriate materials and the possibility to execution customized several parts of the modular device using Additive Manufacturing facilities.