High surface area (>170 m2 g−1) molybdenum nitride was prepared by the temperature-programmed nitridation of α-MoO3 with pure ammonia. The process was optimized by adjusting the experimental variables: the reaction temperature, heating rate, and molar flow rate of ammonia. The physicochemical properties of the as-formed molybdenum nitride were characterized by X-ray diffraction, N2 sorption, transmission electron microscopy, temperature-programmed oxidation/reduction, and X-ray photoelectron spectroscopy. Of the experimental variables, the nitridation temperature was found to be the most critical parameter determining the surface area of the molybdenum nitride. When the prepared molybdenum nitride was exposed to air, the specific surface area rapidly decreased because of the partial oxidation of molybdenum nitride to molybdenum oxynitride. However, the surface area recovered to 90% the initial value after H2 treatment. The catalyst with the highest degree of nitridation showed the best catalytic activity, superior to that of unmodified α-MoO3, for the decomposition of ammonia because of its high surface area.
We described a technology for immobilizing radioiodine in the sod-cages by the interzeolite transformation of iodine-containing LTA (zeolite A) and FAU (zeolites X and Y) into a sodalite (SOD) structure. The immobilization of iodine in the sod-cage was confirmed using diverse characterization methods including powder XRD, elemental analysis, SEM–EDS, 127I MAS NMR, and I 3d XPS. Although both zeolites A (Na-A) and X (Na-X) were well converted into SOD structure in the presence of NaI and AgI, the iodide anions were fixed in the sod-cages only when NaI was used. The ability to adsorb methyl iodide (CH3I) was evaluated for zeolites A and X in which Na+ and/or Ag+ ions were exchanged, and Ag+ and zeolite X showed better adsorption properties than Na+ and zeolite A, respectively. However, when both CH3I adsorption ability and the successive immobilization of iodine by interzeolite transformation were considered, Na-X was determined to be the best candidate of adsorbent among the studied zeolites. More than 98% of the iodine was successfully immobilized in the sod-cage in the SOD structure by the interconversion of Na-X following CH3I adsorption, although the Na-X zeolite exhibited half the CH3I adsorption capacity of Ag-X.