A bond graph model for a singularly perturbed system is presented. This system is characterized by fast and slow dynamics. In addition, the bond graph can have storage elements with derivative and integral causality assignments for both dynamics. When the singular perturbation method is applied, the fast dynamic differential equation degenerates to an algebraic equation; the real roots of this equation can be determined by using another bond graph called singularly perturbed bond graph (SPBG). This SPBG has the characteristic that storage elements of the fast state and slow state have a derivative and integral causality assignment, respectively. Thus, a quasi-steady state model by using SPBG is obtained. A Lemma to get the junction structure from SPBG is proposed. Finally, the proposed methodology is applied to two examples.
4 May 2019 in Mathematical and Computer Modelling of Dynamical Systems
Based on non-linear systems described by multibond graphs, a procedure designed to present symbolic linearization of these multibond graphs, is presented in this paper. Firstly, a junction structure of a multibond graph with multiport gyrators that represent Eulerian junction structures is proposed. In addition, non-linear multiport resistors are considered. By knowing the non-linear causal paths and loops of the non-linear multibond graph, the linearization is obtained by two steps: (1) The original multibond graph on the nominal operating point is evaluated; (2) New and additional paths based on the non-linear causal paths and loops are included. The state space representation of the linearized multibond graph using the corresponding junction structure is presented. An advantage of this methodology is its ability to allow the user to define a nominal operating point in which the linearization will be carried out. In order to apply the proposed methodology, two physical systems are modelled and linearized by multibond graphs: a synchronous generator and a two degrees of freedom PUMA. Simulation results of these non-linear and linearized systems are shown.
The modelling in bond graph of a Skystream wind turbine composed by the blades, a permanent magnet synchronous generator (PMSG), three-phase rectifier, Boost converter and an inverter which is classified as a small-scale system is presented. Bond graphs permit to model systems formed by different energy domains. The Skystream turbine is a good case study to show that the bond graph model is presented in a unified representation approach. The electric power generation system based on this turbine is three-phase, the use of multibond graphs to model the PMSG, three-phase rectifier and inverter are proposed. However, the blades and Boost converter are modelled by single bond graphs. The mathematical representation of a section of a blade and the PMSG are obtained. In order to validate the simulation results obtained by bond graph models, an experimental study of the Skystream is compared with the complete simulation of the turbine. The motivation to develop these models in a bond graph approach is to design and build a low-cost wind turbine similar to the Skystream. Thus, the main contributions of this paper are: a bond graph model of the Skystream wind turbine, the PMSG, rectifier and inverter is modelled by multibond graphs.
The modeling of three-phase electrical systems in the coordinates in a simple and direct way in a multibond graph approach is presented. From the graphical model obtained, a mathematical model in state space can be determined. Thus, studies of the electromagnetic transients of electrical systems can be analyzed. Likewise, this modeling in the physical domain can be applied to balanced or unbalanced systems and the storage elements (inductances and capacitances) can be connected to be linearly independent or dependent. Structural properties such as stability, controllability, observability or controller design can be analyzed in multibond graphs. The proposed methodology is applied to two examples and the simulation results are shown using 20-Sim software.
An alternative method to analyze a class of nonlinear systems in a bond graph approach is proposed. It is well known that the analysis and synthesis of nonlinear systems is not a simple task. Hence, a first step can be to linearize this nonlinear system on an operation point. A methodology to obtain linearization for consecutive points along a trajectory in the physical domain is proposed. This type of linearization determines a group of linearized systems, which is an approximation close enough to original nonlinear dynamic and in this paper is called dynamic linearization. Dynamic linearization through a lemma and a procedure is established. Therefore, linearized bond graph models can be considered symmetric with respect to nonlinear system models. The proposed methodology is applied to a DC motor as a case study. In order to show the effectiveness of the dynamic linearization, simulation results are shown.
The bond graph methodology for modelling an integrated energy distillation column is applied in this paper. The distillation column is built by five trays for a binary mixture. However, due to its modular construction in a bond graph, the number of trays can be increased. In order to link the analysis tools of systems modeled in the bond graph to the mathematical model given to a distillation column, a junction structure of the proposed bond graph is presented. Hence, this junction structure is a way to obtain the state space representation of the modeled column in bond graphs. Likewise, it is well known that distillation columns determine a class of nonlinear systems, so throughout this paper, these systems in a bond graph approach can be analyzed. In order to learn the behavior of the distillation column in the physical domain, simulation results using 20-Sim software are shown. In addition, with the simulation of two case studies consisting of two mixtures with different relative volatilities, the versatility of the column model in a bond graph is presented. In both cases, the increase in the feed flow, the mole fraction of the light component in the feed or the distillate reflux that enriches the concentration of light in the column determine an increase in the mole fraction of light in the distillate and in the bottom reflow. Further, the control design for a distillation column in the physical domain can be extended.