This paper deals with a critical analysis and perspective of key challenges and opportunities in lithium-ion battery recycling. It examines technical limitations, economic constraints, and regulatory fragmentation, while also identifying opportunities through emerging technologies such as direct recycling, ultrasound-assisted leaching, and bioleaching. It also emphasizes the potential of second-life applications, eco-design integration, and policy innovation to advance a circular, sustainable, and resilient battery value chain.
This experimental study explores the mitigation of membrane fouling in membrane bioreactors (MBRs) through the combined use of granular activated carbon (GAC) and powdered activated carbon (PAC). The research assesses the impact of these materials on the fouling resistance, critical flux, and permeate quality using various mixed liquor suspended solids concentrations and carbon dosages. The results indicate that the GAC-PAC combination significantly reduces the total filtration resistance, particularly the cake layer resistance, by 11.7% to 13.6% compared to setups without activated carbon or with the individual carbon types. The study also reveals that this combination decreased the fouling rate by 15% to 24% at critical flux steps, demonstrating substantial improvements in fouling mitigation and operational efficiency. Furthermore, the GAC-PAC combination, which produces an adsorption process, enhances the permeate quality, achieving the near-complete removal of organic matter, total nitrogen, and turbidity, with total phosphorus removal reaching 99%. These findings demonstrate that the combined use of GAC and PAC not only reduces membrane fouling but also improves the overall MBR performance, making it a viable strategy for enhancing the efficiency of wastewater treatment processes.
The environmental impact of seawater reverse osmosis desalination in central Chile was assessed using Life Cycle Assessment (LCA) with the EcoInvent database to address the region’s high water stress. The study analyzed the operational phase using 1 m3 of product water as the functional unit, considering power demand, chemicals, and membranes across eight scenarios that varied energy matrix composition, membrane lifespan, water use, and seawater source. Eighteen environmental indicators were evaluated using the ReCiPe 2016 Midpoint (H) method. Results revealed that eight impact indicators were primarily national in origin, while ten exhibited transboundary characteristics. Power demand was the dominant contributor, exceeding 75% of impacts in 17 of 18 categories. A 25% power increase raised environmental impacts by an average of +21.5%, while the projected 2050 renewable energy scenario showed substantial reductions averaging −43.0%. This demonstrates that power consumption is the principal driver of environmental impacts, underscoring the importance of energy-efficiency measures and integration of Non-Conventional Renewable Energies (NCRE), particularly as fossil-based sources constitute the main contributors to environmental burdens at both national and transboundary scales.
As a response to the growing global demand for sustainable water recovery technologies, this study evaluates a solar-driven humidification-dehumidification system for brine concentration and water recovery. The system integrates two external cover materials – polycarbonate and acrylic – with different cooling configurations: copper tube heat exchangers, thermoelectric Peltier plates, and their combination. A real reverse osmosis brine with total dissolved solids of 73.6 g/L was used as the feed solution. The performance of the system was assessed through the gained output ratio (GOR) and condensation performance (CP). The highest GOR (5.55) and CP (1.16) were obtained using acrylic covers and a combined copper tube–Peltier configuration. The crystallized salts were rich in minerals of economic and industrial importance. In this work, the feasibility of recovering valuable minerals and water has been demonstrated at a pilot-plant scale, which is of particular interest in areas with severe water shortages. This offers potential for resource recovery in the context of zero liquid discharge, contributing thus to circular economy strategies in desalination, and offering an alternative that allows brine to be discharged into natural waters, thus avoiding its potential environmental impact.