Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.

The propagation of pulses through waveguides with sub-wavelength features, inhomogeneous transverse structure, and high index contrast cannot be described accurately using existing models in the presence of nonlinear effects. Here we report the development of a generalised full vectorial model of nonlinear pulse propagation and demonstrate that, unlike the standard pulse propagation formulation, the z-component of guided modes plays a key role for these new structures, and results in generalised definitions of the nonlinear coefficient γ, A_eff , and mode orthognality. While new definitions reduce to standard definitions in some limits, significant differences are predicted, including a factor of ~2 higher value for γ, for emerging waveguides and microstructured fibers.

Porous fibers have been identified as a means of achieving low losses, low dispersion and high birefringence among THz polymer fibers. By exploiting optical fiber fabrication techniques, two types of THz polymer porous fibers—spider-web and rectangular porous fibers— with 57% and 65% porosity have been fabricated. The effective refractive index measured by terahertz time domain spectroscopy shows a good agreement between the theoretical and experimental results indicating a lower dispersion for THz porous fiber compared to THz microwires. A birefringence of 0.012 at 0.65 THz is also reported for rectangular porous fiber.

We propose a novel class of optical fiber with a porous transverse cross-section that is created by arranging sub-wavelength air-holes within the core of the fiber. These fibers can offer a combination of low transmission loss and high mode confinement in the THz regime by exploiting the enhancement of the guided mode field that occurs within these sub-wavelength holes. We evaluate the properties of these porous fibers and quantitatively compare their performance relative to that of a solid core air cladded fiber (microwire). For similar loss values, porous fibers enable improved light confinement and reduced distortion of a broadband pulse compared to microwires.

The dependence of the Brillouin frequency shift on strain in a photonic crystal fiber (PCF) was measured at a wavelength of 1320 nm for the first time to the authors’ knowledge. Together with measurements of the dependence of the Brillouin frequency shift on temperature in the PCF, we demonstrate the feasibility of the highly precise simultaneous measurement of temperature and strain by use of the PCF in a distributed Brillouin sensing system with a spatial resolution of 15 cm.