Jun Yeub Lee

Dr. Jun Yeub Lee

Module research, Samsung Display, Yongin, Gyeonggi-do, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 October 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
LILEE sang il
LEE sang il
SJSeong Hyun Jang
Seong Hyun Jang
YHYoung Joon Han
Young Joon Han
JLJun Yeub Lee
Jun Yeub Lee
JCJun Choi
Jun Choi
KCKwan Hyun Cho
Kwan Hyun Cho
This study experimentally investigated process mechanisms and characteristics of newly developed xenon flash lamp lift-off (XF-LO) technology, a novel thin film lift-off method using a light to heat conversion layer (LTHC) and a xenon flash lamp (XFL). XF-LO technology was used to lift-off polyimide (PI) films of 8.68–19.6 μm thickness. When XFL energy irradiated to the LTHC was 2.61 J/cm2, the PI film was completely released from the carrier substrate. However, as the energy intensity of the XFL increased, it became increasingly difficult to completely release the PI film from the carrier substrate. Using thermal gravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR) and transmittance analysis, the process mechanism of XF-LO technology was investigated. Thermal durability of the PI film was found to deteriorate with increasing XFL energy intensity, resulting in structural deformation and increased roughness of the PI film surface. The optimum energy intensity of 2.61 J/cm2 or less was found to be effective for performing XF-LO technology. This study provides an attractive method for manufacturing flexible electronic boards outside the framework of existing laser lift-off (LLO) technology.

9 May 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JLJun Yeub Lee
Jun Yeub Lee
BJByeong-Kwon Ju
Byeong-Kwon Ju
KCKwan Hyun Cho
Kwan Hyun Cho
We implemented ultra-high resolution patterns of 2822 pixels-per-inch (PPI) via an inkjet printing and vacuum drying process grafted onto a sublimation transfer process. Co-solvented ink with a 1:1 ratio of N,N-dimethylformamide (DMF) to ortho-dichlrorobenzene (oDCB) was used, and the inkjet driving waveform was optimized via analysis of Ohnesorge (Oh)—Reynolds (Re) numbers. Inkjet printing conditions on the donor substrate with 2822 PPI microchannels were investigated in detail according to the drop space and line space. Most sublimation transferred patterns have porous surfaces under drying conditions in an air atmosphere. Unlike the spin-coating process, the drying process of inkjet-printed films on the microchannel has a great effect on the sublimation of transferred thin film. Therefore, to control the morphology, we carefully investigated the drying process of the inkjet-printed inks in the microchannel. Using a vacuum drying process to control the morphology of inkjet-printed films, line patterns of 2822 PPI resolution having a root-mean-square (RMS) roughness of 1.331 nm without voids were successfully fabricated.

1 October 2021 in APL Materials
Verified
Journal Article
Open access
PDF file
JLJun Yeub Lee
Jun Yeub Lee
BJByeong-Kwon Ju
Byeong-Kwon Ju
KCKwan Hyun Cho
Kwan Hyun Cho
We investigated co-solvented solution properties and relations in the sublimation transfer process and optimized intense pulse light (IPL) using time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis. The capillary force induced co-solvented solution into the microchannel, with the co-solvented solution properties influencing the thickness and morphology of the sublimation transferred patterns of the emitting layer. The sublimation transferred pattern was optimized by tuning the ratio of solvents that were mixtures of chlorobenzene and ortho-dichlorobenzene. In addition, an analysis of the interface between pre-deposited layers and the evaporated layer fabricated by variation of IPL energy was conducted by means of ToF-SIMS depth profiling. Host emissions or the occurrence of the intermixing of layers was detected due to insufficient or excessive IPL energy exposure. With the optimized IPL energy, the current efficiency and external quantum efficiency were maximized without a recombination zone shift or intermixing during the IPL evaporation process.

17 August 2026 in Ceramics International
Verified
Journal Article
Closed access
HLHoikwan Lee
Hoikwan Lee
JLJun Yeub Lee
Jun Yeub Lee
SKSungwon Kim
Sungwon Kim
SLSangduk Lee
Sangduk Lee
YLYunyoung Lee
Yunyoung Lee
WCWoon Jin Chung
Woon Jin Chung