Microbial biomass concentration is a key bioprocess parameter, estimated using various labor, operator and process cross-sensitive techniques, analyzed in a broad context and therefore the subject of correct interpretation. In this paper, the authors present the results of P. pastoris cell density estimation based on off-line (optical density, wet/dry cell weight concentration), in-situ (turbidity, permittivity), and soft-sensor (off-gas O2/CO2, alkali consumption) techniques. Cultivations were performed in a 5 L oxygen-enriched stirred tank bioreactor. The experimental plan determined varying aeration rates/levels, glycerol or methanol substrates, residual methanol levels, and temperature. In total, results from 13 up to 150 g (dry cell weight)/L cultivation runs were analyzed. Linear and exponential correlation models were identified for the turbidity sensor signal and dry cell weight concentration (DCW). Evaluated linear correlation between permittivity and DCW in the glycerol consumption phase (<60 g/L) and medium (for Mut+ strain) to significant (for MutS strain) linearity decline for methanol consumption phase. DCW and permittivity-based biomass estimates used for soft-sensor parameters identification. Dataset consisting from 4 Mut+ strain cultivation experiments used for estimation quality (expressed in NRMSE) comparison for turbidity-based (8%), permittivity-based (11%), O2 uptake-based (10%), CO2 production-based (13%), and alkali consumption-based (8%) biomass estimates. Additionally, the authors present a novel solution (algorithm) for uncommon in-situ turbidity and permittivity sensor signal shift (caused by the intensive stirrer rate change and antifoam agent addition) on-line identification and minimization. The sensor signal filtering method leads to about 5-fold and 2-fold minimized biomass estimate drifts for turbidity- and permittivity-based biomass estimates, respectively.
The Kluyveromyces marxianus yeast recently has gained considerable attention due to its applicability in high-value-added product manufacturing. In order to intensify the biosynthesis rate of a target product, reaching high biomass concentrations in the reaction medium is mandatory. Fed-batch processes are an attractive and efficient way how to achieve high cell densities. However, depending on the physiology of the particular microbial strain, an optimal media composition should be used to avoid by-product synthesis and, subsequently, a decrease in overall process effi-ciency. Thus, the aim of the present study was to optimise the synthetic growth medium and feeding solution compositions (in terms of carbon, nitrogen, phosphorous, magnesium, and calcium concentrations) for high cell density K. marxianus fed‑batch cultivations. Additionally, the biomass yields from the vitamin mixture and other macro/microelements were identified. A model predictive control algorithm was successfully applied for a fed-batch cultivation control. Biomass growth and substrate consumption kinetics were compared with the mathematical model predictions. Finally, 2‑phenylethanol biosynthesis was induced and its productivity was estimated. The determined optimal macronutrient ratio for K. marxianus biomass growth was identified as C:N:P = 1:0.07:0.011. The maximal attained yeast biomass concentration was close to 70 g·L-1 and the 2-PE biosynthesis rate was 0.372 g·L−1·h−1, with a yield of 74% from 2-phenylalanine.
As excellent biocontrol agents and plant growth promoters, Trichoderma species are agriculturally important. Trichoderma spp. cultures can be produced using solid-state or submerged cultivation, the latter being much less labor intensive and easier to control and automate. The aim of the study was to investigate the ability to increase the shelf-life of T. asperellum cells by optimizing cultivation media and upscaling the submerged cultivation process. Four different cultivation media were used with or without the addition of Tween 80 and stored with or without incorporation into peat, and viability, expressed as CFU/g, was assessed during one year of storage in an industrial warehouse. The addition of Tween 80 had a positive effect on the biomass yield. The culture medium played a major role in the ability of the mycelium to produce spores, which in turn influenced the amount of CFU. This effect was less pronounced when the biomass was mixed with peat prior to storage. A procedure that increases the number of CFU in a peat-based product formulation is recommended, namely, incubation of the mixture at 30 °C for 10 days prior to storage at 15 °C over an extended period of time.
Bacillus subtilis (Bs) is a bacterium that benefits plants and is used in the production of bio-fungicides. The cultivation of Bs is a crucial step in bio-control preparation production, as it greatly impacts the quality and price of the final product. In a series of shake flask experiments, we investigated the economically feasible broth composition for spore production of Bacillus subtilis MSCL 897, a Latvian soil isolate. Our study investigated the impact of utilizing legume-based flours (such as broad bean, grey pea, and soybean) as the primary nitrogen source, along with sugar-beet molasses, sucrose, or glucose as the carbon source, and yeast extract, peptone, and corn-steep liquor as growth factor additives. Additionally, we examined the effect of using (NH4)2HPO4 or urea as supplementary nitrogen sources, as well as previously established media formulations, on spore yield. Our results showed that a culture medium composed of broad bean flour (10 g/L) and molasses (10 g/L) led to spore productivity of 1.35 ± 0.47 × 108 CFU/mL at 48 h. By enriching the culture medium base constituents with a minor (0.5–1.0 g/L) yeast extract or corn-steep liquor additive, a notable increase in spore productivity was observed, with values of 2.00 ± 0.28 × 108 and 2.34 ± 0.18 × 108 CFU/mL at 48 h, respectively, and sporulation efficiency > 80–90%. As a result, we achieved a high spore yield of the Bacillus subtilis MSCL 897 strain, demonstrating the competitiveness of our approach, which relied on a low-cost medium made mainly from locally available and renewable raw materials.
Soy leghemoglobin (LegH) has been gaining interest over the last years as an efficient flavor and aroma compound in plant-based meat substitutes. Hence, in the following article, we demonstrate the methods for LegH production using a recombinant Komagataella phaffii strain. Multiple fed-batch fermentation with an alternative to a BSM medium, where glucose was used as the main carbon source, was implemented and the growth kinetics, e.g., a maximal specific biomass growth of 0.239 g·g−1·h−1, a biomass yield from the substrate of 0.298 g·g−1, and a maximal specific substrate consumption rate of 0.81 g·g−1·h−1 were identified. Leghemoglobin production resulted in a yield of 0.513 mg·gDCW−1, while the highest biomass density achieved in this study was 121.80 gDCW·L−1. The applied medium that showed potential for additional optimization studies, which, in contrast to BSM, made it possible to separate pH control from nitrogen supply, does not affect medium turbidity measurements and does not induce metabolite synthesis during yeast biomass growth.