The CRDNN is a combined neural network that can increase the holistic efficiency of torque based mobile working machines by about 9% by means of accurately detecting the truck loading cycles. On the one hand, it is a robust but offline learning algorithm so that it is more accurate and much quicker than the previous methods. However, on the other hand, its accuracy can not always be guaranteed because of the diversity of the mobile machines industry and the nature of the offline method. To address the problem, we utilize the transfer learning algorithm and the Internet of Things (IoT) technology. Concretely, the CRDNN is first trained by computer and then saved in the on-board ECU. In case that the pre-trained CRDNN is not suitable for the new machine, the operator can label some new data by our App connected to the on-board ECU of that machine through Bluetooth. With the newly labeled data, we can directly further train the pre-trained CRDNN on the ECU without overloading since transfer learning requires less computation effort than training the networks from scratch. In our paper, we prove this idea and show that CRDNN is always competent, with the help of transfer learning and IoT technology by field experiment, even the new machine may have a different distribution. Also, we compared the performance of other SOTA multivariate time series algorithms on predicting the working state of the mobile machines, which denotes that the CRDNNs are still the most suitable solution. As a by-product, we build up a human-machine communication system to label the dataset, which can be operated by engineers without knowledge about Artificial Intelligence (AI).

Multi working-machines pathfinding solution enables more mobile machines simultaneously to work inside of a working site so that the productivity can be expected to increase evolutionary. To date, the potential cooperation conflicts among construction machinery limit the amount of construction machinery investment in a concrete working site. To solve the cooperation problem, civil engineers optimize the working site from a logistic perspective while computer scientists improve pathfinding algorithms’ performance on the given benchmark maps. In the practical implementation of a construction site, it is sensible to solve the problem with a hybrid solution; therefore, in our study, we proposed an algorithm based on a cutting-edge multi-pathfinding algorithm to enable the massive number of machines cooperation and offer the advice to modify the unreasonable part of the working site in the meantime. Using the logistic information from BIM, such as unloading and loading point, we added a pathfinding solution for multi machines to improve the whole construction fleet’s productivity. In the previous study, the experiments were limited to no more than ten participants, and the computational time to gather the solution was not given; thus, we publish our pseudo-code, our tested map, and benchmark our results. Our algorithm’s most extensive feature is that it can quickly replan the path to overcome the emergency on a construction site.

Mobile machines using a hydrostatic transmission is highly efficient under lower working-speed condition but less capable at higher transport velocities. To enhance overall efficiency, we have improved the powertrain design by combining a hydrostatic transmission with a dual-clutch transmission (DCT). Compared with other mechanical gearboxes, the DCT avoids the interruption of torque transmission in the process of shifting without sacrificing more transmission efficiency. However, there are some problems of unstable torque transmission during the shifting process, and an excessive torque drop occurring at the end of the gear shift, which result in a poor drive comfort. To enhance the performance of the novel structural possibility of powertrain design, we designed a novel control strategy, which maintains the sliding in the torque phase and reduces the difference before and after the engagement, for the motor torque and the clutch torques during the shifting process, and then validated the control effect with model-based simulation. As a result, the control strategy employing clutch and motor torque control achieve a smooth shifting process since the drive torque is well tracked, and highly dynamical actuators are not required. As another benefit, only two calibration parameters are designed and actually needed to adjust the control performance systematically, even for any different sizes machines. Our research indicates the possibility to adopt dual-clutch in the field of construction machines.

Neural Radiance Fields (NeRFs) have shown great potential in modeling 3D scenes. Dynamic NeRFs extend this model by capturing time-varying elements, typically using deformation fields. The existing dynamic NeRFs employ a similar Eulerian representation for both light radiance and deformation fields. This leads to a close coupling of appearance and motion and lacks a physical interpretation. In this work, we propose Dynamic Appearance Particle Neural Radiance Field (DAP-NeRF), which introduces particle-based representation to model the motions of visual elements in a dynamic 3D scene. DAP-NeRF consists of the superposition of a static field and a dynamic field. The dynamic field is quantized as a collection of appearance particles, which carries the visual information of a small dynamic element in the scene and is equipped with a motion model. All components, including the static field, the visual features and the motion models of particles, are learned from monocular videos without any prior geometric knowledge of the scene. We develop an efficient computational framework for the particle-based model. We also construct a new dataset to evaluate motion modeling. Experimental results show that DAP-NeRF is an effective technique to capture not only the appearance but also the physically meaningful motions in a 3D dynamic scene. Code is available at: https://github.com/Cenbylin/DAP-NeRF.

The fleet management of mobile working machines with the help of connectivity can increase not only safety but also productivity. However, rare mobile working machines have taken advantage of V2X. Moreover, no one published the simulation results that are suitable for evaluating the performance of the ad-hoc network at a working site on the highway where is congested, with low mobility, and without building. In this paper, we suggested that IEEE 802.11p should be implemented for fleet management, at least for the first version. Furthermore, we proposed an analytical model for machines to estimate the ad-hoc network performance, i.e., the delay and the packet loss probability in real-time based on the simulation results we made in $ns-3$ . The model of this paper can be further used for determining when shall ad-hoc or cellular network be used in the corresponding scenarios.