Simultaneous spectral and spatial information of any object investigated through electromagnetic radiation leads to the concept of spectral imaging technique (SIT): in terahertz (THz) range, because of limited opacity of various dielectrics, this technique gets further accentuated by “through-barrier” SIT. In this review, we revisit the fundamental physics, important domains of applications and issues with experimental implementations and required image analyses of this technique in THz band. The suitability of THz-SIT in various real-world scenarios are discussed, especially with respect to spectral noise arising out of presence of barriers, long times required for image acquisition, limited portability and customizability of systems based on such technique.
Terahertz (THz) time-domain spectroscopy has been used to characterise cyclic olefin polymers in the range 0.2–1.2 THz. A comparison of the optical properties of the polymer with standard materials currently used to fabricate THz optics, namely high density polyethylene and Picarin, is also presented. This comparison suggests that olefin copolymers are potential candidates for manufacturing optical components for the GHz and THz range.
1 May 2006 in Journal of the Optical Society of America A
The stand-off imaging properties of a terahertz (THz) interferometric array are examined. For this application, the imaged object is in the near-field region limit of the imaging array. In this region, spherical and circular array architectures can compensate for near-field distortions and increase the field of view and depth of focus. Imaging of THz point sources is emphasized to demonstrate the imaging method and to compare theoretical predictions to experimental performance.
9 November 2016 in Journal of Vacuum Science & Technology A
ZnO thin films with very low surface roughness and bulklike electron density were grown on Si and SiO2 by atomic layer deposition. The real and imaginary parts of the complex dielectric function of ZnO on Si show monotonically decreasing values with decreasing film thickness at and below a threshold of about 20 nm. On the other hand, x-ray reflectivity results show that the electron density of our ZnO films is close to that of bulk ZnO and does not vary considerably with film thickness. While the reduction of the dielectric function cannot be explained by the electron density of our ZnO films, the Tanguy–Elliott amplitude prefactor governing the strength of optical interband transitions can explain our results consistently through the lowering of the electron–hole overlap factor at the ZnO/Si interface. In the case of ZnO/Si, a staggered type-II (spatially indirect) quantum well, holes are scattered into the Si substrate, causing a lowering of the electron–hole overlap factor and thus the reduction of excitonic absorption, consequently a decrease in the real and the imaginary parts of the dielectric function. This hypothesis was confirmed with ZnO films grown on SiO2, where a thin type-I quantum well, consisting of a narrower-bandgap semiconductor grown on a wider-bandgap (insulator) substrate, in which both the electron and the hole are confined in the ZnO thin film, leads to an increase in the electron–hole overlap matrix element with decreasing film thickness due to confinement, resulting in enhancement of the excitonic absorption in thinner ZnO films on SiO2.