Jan Böcker

Mr. Jan Böcker

Institute of Materials Engineering, Technische Universität Bergakademie Freiberg
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 November 2020 in Coatings
Verified
Journal Article
Open access
PDF file
JBJan Böcker
Jan Böcker
APAlexander Puth
Alexander Puth
ADAnke Dalke
Anke Dalke
JRJürgen Röpcke
Jürgen Röpcke
JHJean-Pierre van Helden
Jean-Pierre van Helden
HBHorst Biermann
Horst Biermann
Active screen plasma nitrocarburizing (ASPNC) increases the surface hardness and lifetime of austenitic stainless steel without deteriorating its corrosion resistance. Using an active screen made of carbon opens up new technological possibilities that have not been exploited to date. In this study, the effect of screen power variation without bias application on resulting concentrations of process gas species and surface modification of AISI 316L steel was studied. The concentrations of gas species (e.g., HCN, NH3, CH4, C2H2) were measured as functions of the active screen power and the feed gas composition at constant temperature using in situ infrared laser absorption spectroscopy. At constant precursor gas composition, the decrease in active screen power led to a decrease in both the concentrations of the detected molecules and the diffusion depths of nitrogen and carbon. Depending on the gas mixture, a threshold of the active screen power was found above which no changes in the expanded austenite layer thickness were measured. The use of a heating independent of the screen power offers an additional parameter for optimizing the ASPNC process in addition to changes in the feed gas composition and the bias power. In this way, an advanced process control can be established.

2 May 2022 in Coatings
Verified
Journal Article
Open access
PDF file
ABAnja Buchwalder
Anja Buchwalder
JBJan Böcker
Jan Böcker
EHEugen Hegelmann
Eugen Hegelmann
VKVolker Klemm
Volker Klemm
In principle, the plasma nitriding of Al based substrates is a well-known process, though it remains extremely challenging from both the technological point of view and the aspect of stress loading conditions. In order to improve the latter, a duplex treatment consisting of plasma nitriding and subsequent surface remelting using electron beam technology was employed. The focus of this paper (part I) was on the characterisation of the initial microstructure after plasma nitriding. This should create the basis for a better understanding of the processes taking place or changes in the subsequent duplex treatment. This was done with the help of high-resolution imaging and analysis tools in the scanning and transmission electron microscope as well as XPS analyses. Special attention was paid to the nitriding mechanism at the interface as a function of the local microstructural constituents of the hypereutectic Al alloy substrate (Al solid solution, primary silicon, and intermetallic phases). While the main part of the nitride layer formed consisted of AlN and small fractions of pure Al in the diffusion paths, other nitrides and oxides could also be detected in the area of the interface.

23 October 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JBJan Böcker
Jan Böcker
ADAnke Dalke
Anke Dalke
APAlexander Puth
Alexander Puth
CSChristian Schimpf
Christian Schimpf
JRJürgen Röpcke
Jürgen Röpcke
HBHorst Biermann
Horst Biermann
The effect of a controlled oxygen admixture to a plasma nitrocarburizing process using active screen technology and an active screen made of carbon was investigated to control the carburizing potential within the plasma-assisted process. Laser absorption spectroscopy was used to determine the resulting process gas composition at different levels of oxygen admixture using O2 and CO2, respectively, as well as the long-term trends of the concentration of major reaction products over the duration of a material treatment of ARMCO® iron. The short-term studies of the resulting process gas composition, as a function of oxygen addition to the process feed gases N2 and H2, showed that a stepwise increase in oxygen addition led to the formation of oxygen-containing species, such as CO, CO2, and H2O, and to a significant decrease in the concentrations of hydrocarbons and HCN. Despite increased oxygen concentration within the process gas, no oxygen enrichment was observed in the compound layer of ARMCO® iron; however, the diffusion depth of nitrogen and carbon increased significantly. Increasing the local nitrogen concentration changed the stoichiometry of the ε-Fe3(N,C)1+x phase in the compound layer and opens up additional degrees of freedom for improved process control.

10 May 2022 in Coatings
Verified
Journal Article
Open access
PDF file
ABAnja Buchwalder
Anja Buchwalder
JBJan Böcker
Jan Böcker
EHEugen Hegelmann
Eugen Hegelmann
AJAnne Jung
Anne Jung
MMMartin Michler
Martin Michler
VKVolker Klemm
Volker Klemm
Nitriding of Al alloys leads to the formation of a thin, hard nitride layer (AlN) on the surface. A subsequent EBR can both eliminate the nitriding-related cavities under the nitride layer and increase the hardness of the substrate without melting or destroying the nitride layer. This paper deals with investigations regarding the influence of the energy/heat input on the microstructure within both the AlN layer and the remelted Al substrate. Of particular interest was the interface between the AlN and the Al substrate, which changed to a transition zone with a depth of approximately 80 µm. A range of high-resolution imaging and analytical tools for both scanning and transmission electron microscopy were used for these investigations. Based on the findings from the microstructural investigations, a schematic model was developed of the processes occurring within the nitride layer and at the interface as a result of remelting.

1 October 2022 in HTM Journal of Heat Treatment and Materials
Verified
Journal Article
Closed access
JBJan Böcker
Jan Böcker
APA. Puth
A. Puth
APA. V. Pipa
A. V. Pipa
JHJ.-P. H. van Helden
J.-P. H. van Helden
JRJ. Röpcke
J. Röpcke
ADA. Dalke
A. Dalke
Plasma nitrocarburizing by means of active screen technology using an active screen made of carbon fiber-reinforced carbon was carried out by varying the power at the active screen and using oxygen-containing fresh gas components (O 2 , CO 2 ) in the N 2 :H 2 plasma using the example of the quenched and tempered steel AISI 4140 (42CrMo4). The investigations focused on the analysis of the process gas by means of laser absorption spectroscopy, the evaluation of the produced compound layers with regard to structure and phase composition, as well as the resulting properties. It was shown that by varying the process gas atmosphere, the structural composition of the compound layer and the concentration profiles of nitrogen and carbon can be specifically influenced. The high concentrations of carbon-containing compounds in the process gas resulted in complete suppression of γ’-Fe 4 N formation, but cementite was detected in the lower part of the compound layer. The addition of oxygen-containing fresh gases and the resulting change in process gas composition suppressed cementite formation. The results suggest that, in particular, high powers at the carbon active screen and the simultaneous addition of oxygen-containing gases results in the generation of nitrogen-rich, single-phase ε-compound layers.

1 October 2022 in HTM Journal of Heat Treatment and Materials
Verified
Journal Article
Open access
HSHendrik von Schöning
Hendrik von Schöning
MKM. Kadanik
M. Kadanik
MRMichael Reich
Michael Reich
SPS.B. Petersen
S.B. Petersen
OKOlaf Kessler
Olaf Kessler
SMSonja Müller
Sonja Müller
Article Contents / Inhalt was published on October 1, 2022 in the journal HTM Journal of Heat Treatment and Materials (volume 77, issue 5).