Silicon (Si) is expected to be a high-energy anode for the next generation of lithium-ion batteries (LIBs). However, the large volume change along with the severe capacity degradation during the cycling process is still a barrier for its practical application. Herein, we successfully construct flexible silicon/carbon nanofibers with a core–shell structure via a facile coaxial electrospinning technique. The resultant Si@C nanofibers (Si@C NFs) are composed of a hard carbon shell and the Si-embedded amorphous carbon core framework demonstrates an initial reversible capacity of 1162.8 mAh g−1 at 0.1 A g−1 with a retained capacity of 762.0 mAh g−1 after 100 cycles. In addition, flexible LIBs assembled with Si@C NFs were hardly impacted under an extreme bending state, illustrating excellent electrochemical performance. The impressive performances are attributed to the high electric conductivity and structural stability of the porous carbon fibers with a hierarchical porous structure, indicating that the novel Si@C NFs fabricated using this electrospinning technique have great potential for advanced flexible energy storage.
Developing a solid polymer electrolyte with superior flame retardancy and lithium-ion transportation properties is still a challenge. Herein, an intrinsic silicon/phosphorus co-flame retardant polymer solid electrolyte was prepared by using polyethylene glycol (PEG) co-polymerized with silicon and phosphorus-containing monomers. Due to the synergistic flame-retardant effect of silicon and phosphorus elements, this polymer electrolyte exhibits excellent thermal stability and flame resistance. Moreover, the ionic conductivity of the electrolyte at 25 °C is as high as 2.98 × 10−5 S/cm when the mass ratio of LiN(SO2CF3)2 (LiTFSI) and the prepared polymer electrolyte is 10:1. What is more, the LiFePO4/Li all-solid-state battery assembled with this solid electrolyte can work stably at a high temperature of 60 °C and exhibits a specific capacity of 129.2 mAh/g at 0.2 C after 100 cycles, providing a promising application prospect for high-safety lithium-ion batteries.
Sodium-ion batteries (SIBs), as a supplement of lithium-ion batteries (LIBs), are attracting intensive research interest due to their low cost and abundance. Molybdenum disulfide (MoS2) is regarded as a suitable candidates for SIBs electrode materials, which suffer from prominent volume expansion and poor conductivity. In this study, three-dimensional porous graphene composites loaded with MoS2 were prepared via a facile two-step method. The MoS2 nanoflower particles were uniformly dispersed within the layered graphene matrix, and a three-dimensional porous graphene supported MoS2 nanoflower battery (MoS2/3DG) was demonstrated to have superior performance to that of the pristine pure MoS2 nanoflower battery. At a current density of 100 mA/g, the MoS2/3DG delivered a reversible capacity of 420 mAh/g. What is more, it yielded a reversible specific capacity of 310 mAh/g at 2 A/g, showing an excellent rate of 73.8%. The excellent performance of the novel MoS2/3DG composite are attributed to the promoted infiltration of electrolytes and the hindered volume expansion for the porous structure, good conductivity, and robust mechanical properties of graphene.
Tin disulfide (SnS2) is regarded as one of the most suitable candidates as the electrode material for sodium-ion batteries (SIBs). However, the easy restacking and volume expansion properties of SnS2 during the charge/discharge process lead to the destruction of the electrode structure and a decrease in capacity. We successfully synthesized a SnS2 nanocrystalline-anchored three-dimensional porous graphene composite (SnS2/3DG) by combining hydrothermal and high-temperature reduction methods. The SnS2 nanocrystalline was uniformly dispersed within the connected reduced graphene oxide matrix. The SnS2/3DG battery showed a high reversible capacity of 430 mAh/g after 50 cycles at 100 mA/g. The SnS2/3DG composite showed an excellent rate capability with the current density increasing from 100 mA/g to 2 A/g. The excellent performance of the novel SnS2/3DG composite is attributed to the porous structure, which not only promoted the infiltration of electrolytes and hindered volume expansion for the porous structure, but also improved the conductivity of the whole electrode, demonstrating that the SnS2/3DG composite is a prospective anode for the next generation of sodium-ion batteries.