Atif Sardar Khan

Mr. Atif Sardar Khan


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2021 in International Journal of Energy Research
Verified
Journal Article
Closed access
PDF file
AKAtif Sardar Khan
Atif Sardar Khan
FKFarid Khan
Farid Khan

9 November 2022 in IEEE Access
Verified
Journal Article
Open access
AKAtif Sardar Khan
Atif Sardar Khan
FKFarid Khan
Farid Khan
Wearable sensors and electronic devices have gained a lot of attention during the last few years. The advances in low power wearable gadgets have the research venue in the field of energy harvesting to exclude or supplement the battery’s power. Solar energy harvesting is a suitable source to power wearable gadgets. This work presents a novel wearable solar energy harvesting based jacket that can power the in-situ vital health monitoring system (VHMS). The developed VHMS comprised of sensors to measure several data and transferred through various Modules every 3 min with an emergency alert option. To integrate the Solar Energy harvester (SEH) and VHMS, a novel maximum power point tracking is designed, fabricated and tested to compensate the battery during diffused light as power is recorded to be as low as 7.95 × 10 -5 mW at an optimal load of 10 kΩ. Ten flexible solar cells (each 146 mm × 167.5 mm in size) placed each inside a transparent pouch stitched to a jacket. An individual and series configuration of all solar cells is tested in-lab and outside in real environment under different illuminance and irradiance. At an optimal load resistance of 1.5 kΩ, the developed self-powered, smart jacket is capable to generate a voltage of 45 V and power of 1282.57 mW, under lights’ illuminance of 41000 lux and irradiance of 780 W/m 2 . The proposed SEH has been validated through a prototype system. Its performance compares favorably against various brands based on size, power, modes to communicate and sensors.

8 June 2022 in Journal of Sensors
Verified
Journal Article
Open access
PDF file
SBSadia Bakhtiar
Sadia Bakhtiar
FKFarid Khan
Farid Khan
WRWahad Ur Rahman
Wahad Ur Rahman
AKAtif Sardar Khan
Atif Sardar Khan
MAMuhammad Masood Ahmad
Muhammad Masood Ahmad
MIMuhammad Iqbal
Muhammad Iqbal
This work presents modeling, simulation, fabrication, and testing of a novel flow-based electromagnetic energy harvester (F-EMEH) for producing usable electrical energy from the pulsating fluid pressure levels within the pipeline. The power produced by the developed harvester can be effectively utilized for the operation of the wireless monitoring system of pipeline networks. The devised F-EMEH harvester consists of a stationary magnet positioned in the upper cap of the harvester and directly facing the wound coil that is fixed to a flexible latex membrane. The membrane along the coil when exposed to the pulsating fluid flow in the pipeline oscillates with respect to the stationary magnet. This relative motion of the membrane induced the voltage across the coil terminals. The harvester when applied to a pressure amplitude of 625Pa generated an open circuit voltage of 1.2V and a maximum load power of 18.6μW when connected to 4.3Ω load. Furthermore, when integrated to a voltage rectifier, an open circuit output of 4VDC is achieved by the device at a pressure of 625Pa. In addition, with the developed prototype, a 3.6V, battery is charged up to 3.2V within 30min of duration. The voltage and power levels attained by the energy harvester can provide an easy solution for powering wireless sensor nodes mounted on a pipeline network for condition monitoring.

16 April 2025 in Computers
Verified
Journal Article
Open access
PDF file
YKYasir Abbas Khan
Yasir Abbas Khan
FKFaris Kateb
Faris Kateb
ARAteeq Ur Rehman
Ateeq Ur Rehman
AKAtif Sardar Khan
Atif Sardar Khan
Fazal Qudus KhanFazal Qudus Khan
Fazal Qudus Khan
AِAli ِِِAlkhathlan
Ali ِِِAlkhathlan
In smart homes, heavy reliance on appliance automation has increased, along with the energy demand in developing urban areas, making efficient energy management an important factor. To address the scheduling of appliances under Demand-Side Management, this article explores the use of heuristic-based optimization techniques (HOTs) in smart homes (SHs) equipped with renewable and sustainable energy resources (RSERs) and energy storage systems (ESSs). The optimal model for minimization of the peak-to-average ratio (PAR), considering user comfort constraints, is validated by using different techniques, such as the Genetic Algorithm (GA), Binary Particle Swarm Optimization (BPSO), Wind-Driven Optimization (WDO), Bacterial Foraging Optimization (BFO) and the Genetic Modified Particle Swarm Optimization (GmPSO) algorithm, to minimize electricity costs, the PAR, carbon emissions and delay discomfort. This research investigates the energy optimization results of three real-world scenarios. The three scenarios demonstrate the benefits of gradually assembling RSERs and ESSs and integrating them into SHs employing HOTs. The simulation results show substantial outcomes, as in the scenario of Condition 1, GmPSO decreased carbon emissions from 300 kg to 69.23 kg, reducing emissions by 76.9%; bill prices were also cut from an unplanned value of 400.00 cents to 150 cents, a 62.5% reduction. The PAR was decreased from an unscheduled value of 4.5 to 2.2 with the GmPSO algorithm, which reduced the value by 51.1%. The scenario of Condition 2 showed that GmPSO reduced the PAR from 0.5 (unscheduled) to 0.2, a 60% reduction; the costs were reduced from 500.00 cents to 200.00 cents, a 60% reduction; and carbon emissions were reduced from 250.00 kg to 150 kg, a 60% reduction by GmPSO. In the scenario of Condition 3, where batteries and RSERs were integrated, the GmPSO algorithm reduced the carbon emission value to 158.3 kg from an unscheduled value of 208.3 kg, a reduction of 24%. The energy cost was decreased from an unplanned value of 500 cents to 300 cents with GmPSO, decreasing the overall cost by 40%. The GmPSO algorithm achieved a 57.1% reduction in the PAR value from an unscheduled value of 2.8 to 1.2.

1 January 2021 in Journal of Sensors
Verified
Journal Article
Open access
PDF file
AKAtif Sardar Khan
Atif Sardar Khan
FKFarid Khan
Farid Khan
The development of special wearable/portable electronic devices for health monitoring is rapidly growing to cope with different health parameters. The emergence of wearable devices and its growing demand has widened the scope of self‐powered wearable devices with the possibility to eliminate batteries. For instance, the wearable thermoelectric energy harvester (TEEH) is an alternate to batteries, which has been used in this study to develop four different self‐powered wearable jacket prototypes and experimentally validated. It is observed that the thermal resistance of the cold side without a heat sink of prototype 4 is much greater than the rest of the proposed prototypes. Besides that, the thermal resistance of prototype 4 heat sinks is even lower among all proposed prototypes. Therefore, prototype 4 would have a relatively higher heat transfer coefficient which results in improved power generation. Moreover, an increase in heat transfer coefficient is observed with an increase in the temperature difference of the cold and hot sides of a TEEH. Thus, on the cold side, a heat flow increases which benefits heat dissipation and in turn reduces the thermal resistance of the heat sink. Besides that, the developed prototypes on people show that power generation is also affected by factors like ambient temperature, person’s activity, and wind breeze and does not depend on the metabolism. A different mechanism has been explored to maximize the power output within a 16.0 cm2 area, in order to justify the wearability of the energy harvester. Furthermore, it is observed that during the sunlight, any material covering the TEEH would improve the performance of prototypes. Prototypes are integrated into jacket and studied extensively. The TEEH system was designed to produce a maximum delivering power and power density of 699.71 μW and 43.73 μW/cm2, respectively. Moreover, the maximum voltage produced is 62.6 mV at an optimal load of 5.6 Ω. Furthermore, the TEEH (prototype 4) is connected to a power management circuit of ECT310 and LTC3108 and has been able to power 18 LEDs.

23 July 2025 in International Journal of Innovations in Science & Technology
Verified
Journal Article
Open access
PDF file
TUTahmeed Ullah
Tahmeed Ullah
AKAtif Sardar Khan
Atif Sardar Khan
SKSadaf Sardar Khan
Sadaf Sardar Khan
MKMuhammad Iftikhar Khan
Muhammad Iftikhar Khan
AAArbab Masood Ahmad
Arbab Masood Ahmad
A mid Pakistan’s evolving energy landscape,characterized by 62.1% reliance on fossil fuels and micro hydropower (MHP) systems,providesa cost-effective and sustainable energy alternative. This review synthesizes technical, economic, and policy dimensions to assess the present and future role of MHP in Pakistan. It offers a detailed evaluation of turbine types (Pelton, Cross-flow, Kaplan, Turgo), their performance, and suitability under varying head and flow conditions. The study presents a comprehensive assessment of SHP/MHP potential, emphasizing turbine selection, feasibility, and implementation barriers. A key contribution is the development of a practical turbine selection framework comprising a decision-making flow diagram and efficiency table on empirical and field-validated data. Drawing on case studies from Khyber Pakhtunkhwa, Gilgit-Baltistan, and Punjab, the study addresses region-specific generation capacities, sedimentation, seasonal variability, and socio-economic impacts. It also reviews the institutional roles of WAPDA, AEDB, PEPCO, and IPPs, alongside policy frameworks under CPEC and the Alternative Energy Policy. By integrating civil, electrical, and social parameters, the study offers actionable insights for engineers, planners, and policymakers. Despite improvements in turbine efficiency and tariffs, Pakistan’s MHP capacity remains underexploited. Modular designs, smart grids, and rural incentives could bridge energy access gaps and support 2030 renewable energy goals.