Cone jet is a very important and promising mean in electrohydrodynamic atomization or electrospray, where a liquid cone forms at the end of a capillary tube at a rational range of potential and flow rate and a permanent, stable, and thin jet emerges from the cone tip and further disintegrates into plenty of fine drops. Owing to several advantages of uniform and microscale drop size, high-charge density, and precise trajectory control, the cone-jet electrospray effectively meets a wide range of application requirements. This work provides a critical review the recent experiments, theories, analysis, and numerical simulations concerning the formation and evolution of Taylor cone and cone jet, as well as the subsequent jet breakup and drops generation. Our aim is to offer a comprehensive understanding of the underlying physics of the process of cone jet, including the conditions for the formation and the stable operation of the cone jet, and the universal scaling laws governing minimum flow rate, drop size, and electric current, as well as the instability of cone jet. In addition, the coaxial Taylor cone jets and the recent numerical studies on cone-jet dynamics are also briefly reviewed.
Laser dermatology has become a convenient technique for medical treatment. However, the epidermal temperature could be increased, leading to intolerable side effects. Cryogen spray cooling (CSC) is implemented to decrease epidermal damage, but the current CSC could increase cryogen wastage. In this study, the CSC is coupled with a cold air jet (CAJ) and is further subjected to intermittent strategy (ICSC) to mitigate film deposition, enhance heat transfer, and save cryogen consumption, through CAJ-to-spray interaction. The surface temperature is measured by a thin film type-T thermocouple, while the heat transfer is estimated by enhanced Duhamel theorem. The film intensity is captured by a digital single-lens reflex camera through the scattering-illumination technique. The results affirmed the benefits of using ICSC/ICSC-CAJ for laser dermatology. It demonstrated lower surface temperature, film intensity, and film resistance as well as higher convection and efficiency compared with CSC. ICSC-CAJ showed the lowest minimum temperature (1.8%–4.9% decrement) and film resistance (3.8%–17.5% decrement), the highest average convective coefficient (84%–92% increment) and efficiency (7%–9% increment) compared with ICSC. Lower frequency and moderate duties would be preferable for ICSC, while higher frequency and lower duties would be preferable for ICSC-CAJ. The efficiency increased with the saving (110% increment), which insights into our understanding of alternative enhancement toward cryogen saving strategy.
Industrial growth has led to increased electronic component integration, resulting in higher working temperatures and technological failures. Cryogen spray cooling (CSC) could reach cryogenic temperatures with fast-responding, but its heat transfer limitation due to liquid film deposition is potentially challenging. In this study, CSC cooling is incorporated with either a cold air jet (CAJ) or a sweeping jet (SWJ) to enhance heat and fluid flow. A K-type thermocouple is used for measuring the surface temperature, while the improved Duhamel theorem is used to estimate the heat flux. The spray and film intensities are recorded through the Mie-scattering methodology via high-speed camera. The results demonstrated that the CAJ/SWJ exhibited a significant reduction in surface temperature and film intensity, enhanced heat dissipation and spray efficiency compared to CSC cooling. More precisely, it demonstrated a 26%–36% heat transfer coefficient improvement, along with a 52% increase in the corresponding time of the critical heat flux. Meanwhile, the CAJ/SWJ intensifies heat transfer during film and transition boiling, inspired by the fast liquid film evaporations. In contrast, the SWJ is much preferred due to its wider and stable coolant coverage throughout film evaporation, as seen by its greater heat transfer coefficient. The combined results demonstrated the need to promptly eliminate the deposited film, as it holds the potential to serve as a pivotal resolution for the advancement of thermal management technology.