In this paper, an underground experiment at the Äspö Hard Rock Laboratory (HRL) is described. Main goal is optimizing geothermal heat exchange in crystalline rock mass at depth by multistage hydraulic fracturing with minimal impact on the environment, that is, seismic events. For this, three arrays with acoustic emission, microseismicity and electromagnetic sensors are installed mapping hydraulic fracture initiation and growth. Fractures are driven by three different water injection schemes (continuous, progressive and pulse pressurization). After a brief review of hydraulic fracture operations in crystalline rock mass at mine scale, the site geology and the stress conditions at Äspö HRL are described. Then, the continuous, single-flow rate and alternative, multiple-flow rate fracture breakdown tests in a horizontal borehole at depth level 410 m are described together with the monitoring networks and sensitivity. Monitoring results include the primary catalogue of acoustic emission hypocentres obtained from four hydraulic fractures with the in situ trigger and localizing network. The continuous versus alternative water injection schemes are discussed in terms of the fracture breakdown pressure, the fracture pattern from impression packer result and the monitoring at the arrays. An example of multistage hydraulic fracturing with several phases of opening and closing of fracture walls is evaluated using data from acoustic emissions, seismic broad-band recordings and electromagnetic signal response. Based on our limited amount of in situ tests (six) and evaluation of three tests in Ävrö granodiorite, in the multiple-flow rate test with progressively increasing target pressure, the acoustic emission activity starts at a later stage in the fracturing process compared to the conventional fracturing case with continuous water injection. In tendency, also the total number and magnitude of acoustic events are found to be smaller in the progressive treatment with frequent phases of depressurization.

The European Cenozoic Rift System hosts major temperature anomalies in Central Europe. In its central segment, the Upper Rhine Graben (URG), temperatures range from 75°C to nearly 150°C at a depth of 2000 m. Different hypotheses have been suggested to explain the localization of these anomalies. Our review and comprehensive interpretation of gravimetric and magnetic data, as well as neotectonic activity patterns, suggests that low-density, mostly magnetic and fractured granitic basement is systematically associated with major temperature anomalies. Further analyses provide insight into different heat transport processes contributing to the localization of these anomalies. Magnetic and gravity anomalies are known to represent lithological variations associated with the pre-Permian. We show their spatial relationship with positive temperature anomalies in the URG. Correlation between magnetics and temperature reveal a mean contribution of heat production to the temperature anomaly of about 10–15°C. A slightly higher mean value is obtained from correlation between gravity and temperature, which may be attributed to effects resulting from fracture porosity. The spatial relationship between temperature anomalies and neotectonic patterns indicates compressional shear and uplift regime for the major anomalies of the central segment of the URG. This is in agreement with different numerical models indicating free convection on fracture zones linked to faults. Our findings show that about 15–25% of the temperature anomaly can be attributed to variation in heat production. Hydrothermal circulation convection along faults, activated by the tectonic context, may explain the remaining 75–85% of the temperature anomalies.