First built models of Remotely Piloted Air System (RPAS) communication channels based on Wideband Code Division Multiple Access (WCDMA) 3GPP Standard were designed. Base Station (BS) transmission within the Radio Line of Sight (RLoS) and through the satellite using Beyond Radio Line of Sight (BRLoS) was considered. The dependencies of the Bit Error Rate (BER) on the signal-noise ratio for different RPAS velocities and WCDMA сhannel models were obtained. The dependences of the BER on the signal-noise ratio for different levels of satellite transponder nonlinearity were studied. The dependence of the BER on the BS antenna diameter in case of the transponder nonlinearity was analysed. The dependencies for satellite channel characteristics, first obtained taking into account the motion of the RPAS, make it possible to predict the behavior of the communication system in critical conditions.
Deploying of Fifth Generation and Beyond Fifth Generation (5G/B5G) wireless networks will require wider coverage, flexible connectivity, low latency, support for a large number of user devices, and more bandwidth. This article explores the paradigm that Remotely Piloted Air Systems (RPASs) or Unmanned Aerial Vehicles (UAVs) are integrated as a communication platform with cellular networks using radio access. It is important to know the possibilities and ways of such integration for effective interaction with RPASs. This paper studies the issues of ensuring the required Quality of Service (QoS) during heavy traffic and the choice of necessary data transmission modes for this. Models of RPAS communication channels with different architectures were created. The relationships between models’ performance and traffic parameters were obtained using the NetCracker Professional 4.1 software. The dependencies of the Average Utilization (AU) on the Transaction Size (TS) were analyzed. The effects of different bandwidths and the Bit Error Rate (BER) were studied. The traffic characteristics in all models were compared.
1 January 2019 in Transport and Aerospace Engineering
Original models of RPAS communication channels based on IEEE 802.11b Standard, including both Base Station transmission within the Radio Line of Sight, and through the satellite using Beyond Radio Line of Sight, were built. Dependencies of the Bit Error Rate on the Signal-Noise Ratio for different payload data rates were obtained. Transponder nonlinearity and Base Station antenna diameter impact were analysed.
1 January 2020 in Transport and Aerospace Engineering
MIMO-OFDM models of RPAS communication channels based on LTE Standard were built. Dependencies of the BER on the SNR for Extended Pedestrian A and Extended Vehicular A models using 2-by-2 multiple antennas were obtained. Dependencies of the BER on the SNR for different levels of Frequency Offset at satellite transponder were studied.