The aim of this review was to assess the current viable technologies for wireless power delivery and data transmission through metal barriers. Using such technologies sensors enclosed in hermetical metal containers can be powered and communicate through exterior power sources without penetration of the metal wall for wire feed-throughs. In this review, we first discuss the significant and essential requirements for through-metal-wall power delivery and data transmission and then we: (1) describe three electromagnetic coupling based techniques reported in the literature, which include inductive coupling, capacitive coupling, and magnetic resonance coupling; (2) present a detailed review of wireless ultrasonic through-metal-wall power delivery and/or data transmission methods; (3) compare various ultrasonic through-metal-wall systems in modeling, transducer configuration and communication mode with sensors; (4) summarize the characteristics of electromagnetic-based and ultrasound-based systems, evaluate the challenges and development trends. We conclude that electromagnetic coupling methods are suitable for through thin non-ferromagnetic metal wall power delivery and data transmission at a relatively low data rate; piezoelectric transducer-based ultrasonic systems are particularly advantageous in achieving high power transfer efficiency and high data rates; the combination of more than one single technique may provide a more practical and reliable solution for long term operation.
As bearings are critical components of a mechanical system, it is important to characterize their wear states and evaluate health conditions. In this paper, a novel approach for analyzing the relationship between online oil multi-parameter monitoring samples and bearing wear states has been proposed based on an improved gray k-means clustering model (G-KCM). First, an online monitoring system with multiple sensors for bearings is established, obtaining oil multi-parameter data and vibration signals for bearings through the whole lifetime. Secondly, a gray correlation degree distance matrix is generated using a gray correlation model (GCM) to express the relationship of oil monitoring samples at different times and then a KCM is applied to cluster the matrix. Analysis and experimental results show that there is an obvious correspondence that state changing coincides basically in time between the lubricants’ multi-parameters and the bearings’ wear states. It also has shown that online oil samples with multi-parameters have early wear failure prediction ability for bearings superior to vibration signals. It is expected to realize online oil monitoring and evaluation for bearing health condition and to provide a novel approach for early identification of bearing-related failure modes.
Vibro-acoustic modulation is a convenient and effective nondestructive detecting approach. However, when using this technology to monitor structures under in-service conditions, conventional damage indices will not be able to effectively track the damage propagation due to the detrimental influence induced by service load. In this paper, an analysis model was approached based on plasticity induced crack closure stress analysis. This model reveals the linear dependence between the crack size and the changing rate of contact area with respect to external applied load. A load insensitive damage index (LIDI) was then developed aiming to track the crack growth under varying applied load. Results of on-line experiments confirm the load effect on the conventional damage index and prove that the LIDI is able to track the crack propagation under varying applied load. Furthermore, experimental results also demonstrate that the LIDI shows a higher sensitivity of small crack and also other improved tracking performance compared with the conventional one. We believe the LIDI holds a great potential in early damage inspection of in-service structures.
The phenomenon of logical stochastic resonance (LSR) in a nonlinear bistable system is demonstrated by numerical simulations and experiments. However, the bit rates of the logical signals are relatively low and not suitable for practical applications. First, we examine the responses of the bistable system with fixed parameters to different bit rate logic input signals, showing that an arbitrary high bit rate LSR in a bistable system cannot be achieved. Then, a normalized transform of the LSR bistable system is introduced through a kind of variable substitution. Based on the transform, it is found that LSR for arbitrary high bit rate logic signals in a bistable system can be achieved by adjusting the parameters of the system, setting bias value and amplifying the amplitudes of logic input signals and noise properly. Finally, the desired OR and AND logic outputs to high bit rate logic inputs in a bistable system are obtained by numerical simulations. The study might provide higher feasibility of LSR in practical engineering applications.
Wireless ultrasonic vibration energy transmission systems through metal barriers based on piezoelectric transducers have drawn a lot of focus due to the advantage of nonpenetration of the barriers, thus maintaining the integrity of sealed structures. It is meaningful to investigate appropriate modeling methods and to characterize such wireless ultrasonic energy transmission channels with different geometric shapes. In this paper, equivalent circuit modeling and finite element modeling methods are applied to the planar metal barrier channel, and a 3‐dimensional finite element modeling method is applied to the cylindrical metallic barrier channel. Meanwhile, the experimental setup is established and measurements are carried out to validate the effectiveness of the corresponding modeling methods. The results show that Leach’s equivalent circuit modeling method and finite element modeling method are nearly similarly effective in characterizing the planar metal barrier channel. But for a cylindrical metal barrier, only the three‐dimensional finite element modeling method is effective. Furthermore, we found that, for the planar barrier, the effect of standing waves on the efficiency of wireless energy transmission is dominated. But for the curved barrier, only the resonant phenomenon of the piezoelectric transducer exists.
1 January 2019 in Mathematical Problems in Engineering
The investigation of the wireless ultrasonic energy and signal transmission through metal barrier into hermitical metallic structures has become an interesting field of research. The most often constructed acoustic‐electric ultrasonic power transmission channels are based on piezoelectric transducers. Effective modeling methods with accuracy are essential to the performance prediction and optimal design of such channels. Up to now, there exists a variety of modeling methods including theoretical analytical method, equivalent circuit method, two‐port network method, and finite element modeling method. However there is a little chaos about how to choose an appropriate modeling method among them. There is also a lack of a systematic modeling framework presented involving principles, advantages, disadvantages, and constraint conditions of these methods. In this review, a common modeling framework for through‐metal‐wall acoustic‐electric channels based on piezoelectric transducers is presented. The principles of the major modeling methods are introduced and the adoptability and constraints of each method are discussed. For each modeling method, simulation and or experimental results are also presented to validate the accuracy of the corresponding modeling method.