Shuhei Kodama

Dr. Shuhei Kodama

Tokyo University of Agriculture and Technology
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Precision Engineering
Verified
Journal Article
Closed access
Shuhei KodamaShuhei Kodama
Shuhei Kodama
SSShinya Suzuki
Shinya Suzuki
KHKazuya Hayashibe
Kazuya Hayashibe
KSKeita Shimada
Keita Shimada
MMMasayoshi Mizutani
Masayoshi Mizutani
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa

5 November 2018 in International Journal of Automation Technology
Verified
Journal Article
Closed access
Shuhei KodamaShuhei Kodama
Shuhei Kodama
SSShinya Suzuki
Shinya Suzuki
ASAkihiro Shibata
Akihiro Shibata
KSKeita Shimada
Keita Shimada
MMMasayoshi Mizutani
Masayoshi Mizutani
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa
In recent years, nanostructures have been required for industry and medical services, to perform functions such as reduction in friction, control of wettability, and enhancement in biological affinity. Ultrashort pulsed lasers have been applied to meet these demands, and have been actively studied both experimentally and theoretically in terms of phenomena and principles. In this study, to clarify the phenomenon of the fabrication of laser-induced periodic surface structures (LIPSS), and its application to industry, experiments were conducted on SUS304, titanium, and nickel-phosphorus by a short pulsed laser that has a longer pulse duration, higher cost-effectiveness, and higher stability than ultrashort pulsed lasers. The results confirmed that while LIPSS were fabricated on Ti and Ni-P workpieces, a uniform fine periodic structure was not fabricated on the whole irradiated surface of SUS304, and crystal grain boundaries appeared with low energy density and irradiation number because SUS304 is an alloy composed of Fe, Cr, and Ni. Further, the short pulsed laser has a low power and long pulse duration, inducing the thermal effect. We clarified the effect of crystal structure on fabricating fine periodic surface structures with short pulsed laser.

1 November 2021 in Precision Engineering
Verified
Journal Article
Closed access
LCLiwei Chen
Liwei Chen
YZYifei Zhang
Yifei Zhang
Shuhei KodamaShuhei Kodama
Shuhei Kodama
SXShaolin Xu
Shaolin Xu
KSKeita Shimada
Keita Shimada
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa

5 July 2020 in International Journal of Automation Technology
Verified
Journal Article
Closed access
RTRyohei Takase
Ryohei Takase
Shuhei KodamaShuhei Kodama
Shuhei Kodama
KSKeita Shimada
Keita Shimada
HMHolger Mescheder
Holger Mescheder
KWKai Winands
Kai Winands
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa
Functional surface creation technologies have garnered increasing attention over the years. These technologies can provide various functions to a material by establishing a fine structure on the material surface and responding to the needs of industrial products with distinguished functions or high values. In addition, by creating a “composite fine structure,” which is composed of two kinds of structures with different scales, the enhancement of functions and emergence of new functionalities can be expected. Hence, our study combined a micrometer-scale V-shaped groove structure using an ultra-precision cutting and nanometer-scale ultra-fine periodic structure (LIPSS) using a short-pulsed laser. Then, we clarified the creation principle and studied the functionality of the structure, specifically, its wettability. As a result, it was found that optical behavior inside the V-shaped groove changed; therefore, the composite structure changed depending on the groove angle, laser polarization direction, and number of times of irradiation. In addition, it was found that the water wettability changed depending on the type of formed micro-nano composite structures. Moreover, the wettability could be controlled by depending on how the structure is used.

5 July 2020 in International Journal of Automation Technology
Verified
Journal Article
Closed access
Shuhei KodamaShuhei Kodama
Shuhei Kodama
KSKeita Shimada
Keita Shimada
MMMasayoshi Mizutani
Masayoshi Mizutani
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa
Compared with traditional nanotexturing methods, an ultrashort-pulsed laser is an efficient technology of fabricating nanostructures called laser-induced periodic surface structures (LIPSS) on material surfaces. LIPSS are easily fabricated when the pulse duration is shorter than collisional relaxation time (CRT). Accordingly, ultrashort-pulsed lasers have been mainly used to study LIPSS, but they unstably irradiate while requiring high costs. Although long-pulsed lasers have low cost and high stability, the phenomena (such as the effect of pulse duration, laser wavelength, and heat) of the LIPSS fabricated using short-pulsed lasers with the pulse duration close to the maximum CRT, which is greater than femtosecond, have not been clarified. However, the nanosecond pulse laser has been reported to produce LIPSS, but those were unclear and ununiform. In this study, the short-pulsed laser with the pulse duration of 20 ps, which is close to the maximum CRT, was employed to clarify the effects of pulse duration and heat on the fabrication of LIPSS and to solve problems associated with ultrashort-pulsed lasers. First, a finite-difference time-domain simulation was developed at 20-ps pulse duration to investigate the effects of irradiation conditions on the electric-field-intensity distribution. Subsequently, experiments were conducted using the 20-ps pulse laser by varying conditions. The aspect ratio of the LIPSS obtained was greater than that of the LIPSS fabricated using ultrashort-pulsed lasers, but LIPSS were not fabricated at 355- and 266-nm laser wavelength. In addition, the short-pulsed laser experienced thermal influences and a cooling material was effective for the fabrication of LIPSS with high-aspect-ratio. This demonstrates the effects of pulse duration close to the CRT and heat on the fabrication of LIPSS.

5 July 2016 in International Journal of Automation Technology
Verified
Journal Article
Closed access
Shuhei KodamaShuhei Kodama
Shuhei Kodama
TUTohoku University
Tohoku University
ASAkihiro Shibata
Akihiro Shibata
SSShinya Suzuki
Shinya Suzuki
KSKeita Shimada
Keita Shimada
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa
Ultrashort-pulsed laser irradiation is a more efficient approach to the fabrication of fine surface structures than traditional processing methods. However, it has some problems: the equipment expenses usually increase as the pulse shortens, and the process principle has not been clarified completely, although the collisional relaxation time (CRT) is assumed to be a major factor. In this study, a 20-ps pulsed laser was employed to fabricate nanometer-sized periodic structures on a stainless steel alloy, SUS304. The pitch length of the fabricated fine periodic structures was similar to the laser wavelength, and the results suggested that periodic structures could be fabricated within a limited range of the laser fluence. In order to expand the effective fluence range (EFR) and to control the pitch length, laser irradiation was carried out with different workpiece temperatures and the laser wavelengths. In this way, CRT was extended and EFR was expanded by cooling the workpiece, and the pitch lengths were approximately equal to the laser wavelengths. As a result, two things were found: it is easier to fabricate the fine periodic structures by cooling the workpiece, and it is possible to control the pitch length of the fine periodic structures by changing the laser wavelength.