A new route for deep hydrodenitrification (HDN) by solid catalyst coupling with ionic liquids (ILs) under mild conditions was proposed. Ni2P/SBA-15 activated at different temperatures were characterized with XRD, XPS, TG/DTA, and TEM and studied for further improvement. The deep HDN catalyzed by Ni2P/SBA-15 coupling with different ILs was evaluated. [Bmim]BF4 was selected as the best one compared with [Emim]BF4, [Bmim]Cl and [Bmim]Br. The effect of reaction temperature, hydrogen pressure and the amount of IL on denitrification efficiency was investigated with parallel experiments using Ni2P/SBA-15 coupling with [Bmim]BF4. The N-removal efficiency increased from 27.09% to 73.48% after optimization. The IL system could be recycled for three times without a significant decrease in HDN activity. The coupled catalyzed HDN process and mechanism were also proposed and evaluated preliminarily through molecular simulation.
18 January 2021 in Journal of Materials Chemistry C
Poly(aniline- co -pyrrole) formed on SWCNTs via electropolymerization affords a greatly enhanced power factor of 111.4 ± 3.2 μW m −1 K −2 at room temperature.
Thermoelectric (TE) materials are capable of realizing the direct conversion between heat and electricity, holding a giant prospect in the sustainable development of modern society. Conductive polymers (CPs) are suitable for the preparation of TE materials given their low-cost, lightweight, flexible, and easy processing properties. With the accelerating pace of flexible composite development, there is intensive interest in their emerging applications in various aspects such as wearable electronics and thermoelectric sensors. In order to further improve the thermoelectric properties, a series of new methods have been proposed to prepare conductive polymer-based thermoelectric composites and improve their thermoelectric properties. In this review, we discuss the compositing methods, properties, and applications of conductive polymer-based TE composites. The challenges and future development directions in the design and application of conductive polymer matrix composites are also pointed out.
In this study, a series of Ni10MoxAl composite metal oxide (Ni10MoxAl, NiO = 10 wt.%, x = 2.5, 5, 10, 15, 20 wt.%) catalysts with different Mo content were prepared by a solvothermal method using a water—ethanol system. By employing various characterization technologies, it was confirmed that the suitable amount of the Mo element can not only promote the dispersion of the Ni species but also inhibit the formation of the inactive NiAl2O4 phase. Consequently, the hydrogenation activity of the Ni10MoxAl catalysts was affected by the particle size of the active components and the amount of the NiAl2O4 phase. As a result, the Ni10Mo10Al catalyst showed the best catalytic performance on methyl acrylate hydrogenation, and the yield of methyl propionate can be increased from 53.7% to 89.5% at 100 °C and 1 MP H2, compared with the Ni10Mo10/γ–Al2O3 catalyst prepared by a traditional impregnation method. The stability of the Ni10Mo10Al catalyst was also investigated, and the catalyst can run stably for 23 h. The novel strategy adopted in this article provides a new direction for the preparation of high activity Ni–Mo catalysts.