Methanol is currently considered one of the most useful chemical products and is a promising building block for obtaining more complex chemical compounds, such as acetic acid, methyl tertiary butyl ether, dimethyl ether, methylamine, etc. Methanol is the simplest alcohol, appearing as a colorless liquid and with a distinctive smell, and can be produced by converting CO2 and H2, with the further benefit of significantly reducing CO2 emissions in the atmosphere. Indeed, methanol synthesis currently represents the second largest source of hydrogen consumption after ammonia production. Furthermore, a wide range of literature is focused on methanol utilization as a convenient energy carrier for hydrogen production via steam and autothermal reforming, partial oxidation, methanol decomposition, or methanol–water electrolysis reactions. Last but not least, methanol supply for direct methanol fuel cells is a well-established technology for power production. The aim of this work is to propose an overview on the commonly used feedstocks (natural gas, CO2, or char/biomass) and methanol production processes (from BASF—Badische Anilin und Soda Fabrik, to ICI—Imperial Chemical Industries process), as well as on membrane reactor technology utilization for generating high grade hydrogen from the catalytic conversion of methanol, reviewing the most updated state of the art in this field.
Hydrogen is considered one of the energy carriers of the future due to its high mass-based calorific value. Hydrogen combustion generates only water, and it can be used directly as a fuel for electricity/heat generation. Nowadays, about 95% of the hydrogen is produced via conversion of fossil fuels. One of the future challenges is to find processes based on a renewable source to produce hydrogen in a sustainable way. Bioethanol is a promising candidate, since it can be obtained from the fermentation of biomasses, and easily converted into hydrogen via steam catalytic reforming. The correct design of catalysts and catalytic supports plays a crucial role in the optimization of this reaction. The best results have to date been achieved by noble metals, but their high costs make them unsuitable for industrial application. Very satisfactory results have also been achieved by using nickel and cobalt as active metals. Furthermore, it has been found that the support physical and chemical properties strongly affect the catalytic performance. In this review, zeolitic materials used for the ethanol steam reforming reaction are overviewed. We discuss thermodynamics, reaction mechanisms and the role of active metal, as well as the main noble and non-noble active compounds involved in ethanol steam reforming reaction. Finally, an overview of the zeolitic supports reported in the literature that can be profitably used to produce hydrogen through ethanol steam reforming is presented.
In this study, we assessed the quantity, strength, and acidity of zeolite composites comprising Silicalite-1 grown on ZSM-5 crystals using a combination of infrared (IR) and solid-state nuclear magnetic resonance (NMR) spectroscopy. The composites were created through the direct growth of Silicalite-1 crystals on ZSM-5 (P_ZSM-5), either with or without the organic structure-directing agent (OSDA) introduced into the ZSM-5 channels (samples: H_ZSM-5_Sil1 and TPA_ZSM-5_Sil1). The results revealed that Silicalite-1 grew differently when the ZSM-5 core was in the H+ form (empty pores) compared to when the OSDA was still present in the sample. This distinction was evident in the textural properties, with a decrease in the micropore surface area and an increase in the external surface area in the H_ZSM-5_Sil1 compared to the parent sample. The TPA_ZSM-5_Sil1 composite exhibited characteristics similar to the parent zeolite. These findings were further supported by 29Si NMR, which revealed a comparable local order for the parent (P_ZSM-5) and TPA_ZSM-5_Sil1 samples, along with a broadening of the Q4 peak for the H_ZSM-5_Sil1 composite. Additionally, the acid sites were preserved in the TPA_ZSM-5_Sil1 composite, while in the H+-form core, the concentration of Brønsted acid sites significantly decreased. This reduction in isolated Brønsted acid sites was further corroborated by 1H NMR.