Mycelium-Based Composites (MBCs) are innovative engineering materials made from lignocellulosic by-products bonded with fungal mycelium. While some performance characteristics of MBCs are inferior to those of currently used engineering materials, these composites nevertheless prove to be superior in ecological aspects. Improving the properties of MBCs may be achieved using an adequate substrate type, fungus species, and manufacturing technology. This article presents scientifically verified guiding principles for choosing a fungus species to obtain the desired effect. This aim was realized based on analyses of scientific articles concerning MBCs, mycological literature, and patent documents. Based on these analyses, over 70 fungi species used to manufacture MBC have been identified and the most commonly used combinations of fungi species-substrate-manufacturing technology are presented. The main result of this review was to demonstrate the characteristics of the fungi considered optimal in terms of the resulting engineering material properties. Thus, a list of the 11 main fungus characteristics that increase the effectiveness in the engineering material formation include: rapid hyphae growth, high virulence, dimitic or trimitic hyphal system, white rot decay type, high versatility in nutrition, high tolerance to a substrate, environmental parameters, susceptibility to readily controlled factors, easy to deactivate, saprophytic, non-mycotoxic, and capability to biosynthesize natural active substances. An additional analysis result is a list of the names of fungus species, the types of substrates used, the applications of the material produced, and the main findings reported in the scientific literature.

Mycelium-based composites (MBCs) have attracted growing attention due to their role in the development of eco-design methods. We concurrently analysed scientific publications, patent documents, and results of our own feasibility studies to identify the current design issues and technologies used. A literature inquiry in scientific and patent databases (WoS, Scopus, The Lens, Google Patents) pointed to 92 scientific publications and 212 patent documents. As a part of our own technological experiments, we have created several prototype products used in architectural interior design. Following the synthesis, these sources of knowledge can be concluded: 1. MBCs are inexpensive in production, ecological, and offer a high artistic value. Their weaknesses are insufficient load capacity, unfavourable water affinity, and unknown reliability. 2. The scientific literature shows that the material parameters of MBCs can be adjusted to certain needs, but there are almost infinite combinations: properties of the input biomaterials, characteristics of the fungi species, and possible parameters during the growth and subsequent processing of the MBCs. 3. The patent documents show the need for development: an effective method to increase the density and the search for technologies to obtain a more homogeneous internal structure of the composite material. 4. Our own experiments with the production of various everyday objects indicate that some disadvantages of MBCs can be considered advantages. Such an unexpected advantage is the interesting surface texture resulting from the natural inhomogeneity of the internal structure of MBCs, which can be controlled to some extent.

Mycelium-based composites (MBCs) are alternative biopolymers for designing sustainable furniture and other interior elements. These innovative biocomposites have many ecological advantages but present a new challenge in aesthetics and human product acceptance. Grown products, made using living mycelium and lignocellulosic substrates, are porous, have irregular surfaces and have irregular coloring. The natural origin of these types of materials and the fear of fungus can be a challenge. This research investigated the level of human acceptance of the new material. Respondents were students of architecture who can be considered as people involved in interior design and competent in the design field. Research has been performed on the authors’ prototype products made from MBCs. Three complementary consumer tests were performed. The obtained results measured the human reactions and demonstrated to which extents products made of MBCs were “likeable” and their nonobvious aesthetics were acceptable to the public. The results showed that MBC materials generally had a positive or not-negative assessment. The responses after the pairwise comparison of the MBC with wall cladding samples pointed out the advantage of ceramic reference material above the MBC based on an overall assessment. The respondents also believed that the chamotte clay cladding would be easier to fit into the aesthetics of a modern interior and would in better accordance with its style. Although the MBC was less visually appealing, the respondents nevertheless found it more interesting, original, and environmentally friendly. The experiments suggested that the respondents had double standards regarding MBCs. MBCs were generally accepted as ecological, but not in their own homes. All of these results support current and future applications of MBCs for manufacturing items where enhanced aesthetics are required.

Mycelium-based composites (MBCs) are biomaterials with scientifically proven potential to improve sustainability in construction. Although mycelium-based products are not entirely new, their use in engineering presents challenges due to the inherent properties of this fungal material. This study investigated professional architects’ and interior designers’ perceptions of MBCs, focusing on familiarity, aesthetic appeal, and willingness to use. The first phase of the survey explored respondents’ views on material-related ecological design principles. In the second phase, respondents evaluated ten small architectural objects crafted from MBCs, focusing on form, detail, and visual appeal. The last phase of the survey measured their interest in using mycelium in their design work. The results revealed that MBCs were relatively unknown among the surveyed professionals; only every second respondent knew this material. Despite this, 90% found MBCs visually appealing after seeing the examples. Interestingly, the natural, unprocessed appearance of the material was assessed as less aesthetically pleasing, with thermal treatment improving its perceived value. Architects were more receptive to using MBCs in their professional projects for customers than for personal use. This observation points to a ‘double standard’: professional architects are more open to using MBCs in projects not intended for their own use.

Mycelium-based composites are a promising sustainable material with inherent fire resistance and acoustic absorption properties, the extent of which depends on the fungal species, the substrate, and the growth technology. These materials exhibit superior fire performance compared to synthetic polymers, characterized by low heat release, minimal smoke production, and a high char yield that inhibits flame spread. Some composites have even demonstrated self-extinguishing capabilities. Despite these advantageous properties, their application in the construction industry remains limited. To assess mycelium’s current trajectory, this study analyzes 90 real-world architectural and design projects. Our findings indicate that Ganoderma lucidum and Pleurotus ostreatus are the most commonly used fungi, cultivated on substrates such as straw, wood, and sawdust. Architectural applications are dominated by building blocks, insulation, and facade panels, whereas design and art applications focus on packaging, furniture, and sculptures. A key distinction emerges: architectural projects prioritize function, while artistic projects emphasize esthetic experimentation. Although commercially successful in packaging, the use of mycelium in construction is currently limited to temporary structures. Enhancing its structural and load-bearing properties through further research is essential for its widespread use in architecture. However, mycelium is poised to become a key material that drives innovation in sustainable construction.