In this paper, we presented an ultra-wideband multiple-input multiple-output (MIMO) antenna system with high element-isolation for the application in 5G metal-frame smartphones. We proposed T-shaped and C-shaped slots on the metal frame generating four resonances to enhance the bandwidth. What’s more, we introduce modified H-shaped slots between each antenna-element to improve the element-isolation of MIMO antenna system. As a result, the MIMO antenna system has a wide bandwidth of 58% ranging from 3.3 to 6 GHz and the element-isolation is over 18 dB crossing the effective frequency band. Thanks to the decent element-isolation, the envelope correlation coefficient (ECC) between each antenna-element is below 0.05 providing a reliable anti-interference for the MIMO antenna system. In addition, the measured radiation efficiencies of the MIMO antenna system are higher than 40%. At last, we analyze the effects caused by user’s hands and head to guarantee the robustness of the MIMO antenna system in practical applications.
17 February 2023 in IEEE Antennas and Wireless Propagation Letters
This letter introduces a frequency-reconfigurable dielectric resonator antenna (DRA) with a water layer integration. The proposed method is based on the strategy-combination of mode reconfiguration and dielectric loading. Firstly, the frequency band of the DRA is reconfigured between the resonant frequencies of the fundamental $TE^\rm{y}_{111}$ and quasi- $TE^\rm{y}_{111}$ modes by flowing liquid control of water pumping in and out of the microfluidic cavity. Then, the frequency response of quasi- $TE^\rm{y}_{111}$ mode is continuously swept by altering the thickness of water layer. For demonstration, the DRA is designed with a solid dielectric material of K9 glass with the permittivity of 6.25 and loaded with a layer of fresh water with the permittivity of 77. Finally, the proposed antenna is fabricated and measured, which performs with a wideband reconfigurability and stable far-field performance corresponding to the different frequency responses.
A planar microwave array device with complex electromagnetic functional reconfigurability is demonstrated by means of phase transition film VO2 to manipulate the electromagnetic distribution. Based on planar patch architecture, the microwave device can switch between antenna array and cascaded filter functions. Furthermore, hybrid EM functions such as cascaded antenna arrays and filters are enabled, themselves with further reconfigurability. Therefore, a single design realizes many mono and hybrid antenna and filter functions, which are determined by the order of the array. For simplicity of demonstration, a 2 × 2 array device working at three reconfigurable center frequency points of 3.1, 3.7, and 4.4 GHz, fully compatible with standard planar CMOS processing. A comprehensive design method is proposed to meet the design requirements of a patch-based antenna array and cascaded filter. Based on the functionally reconfigurable microwave device, the front-end circuit could be recombined to suitable for multifunctional microwave systems.
A soft and tunable microwave bandpass Chebyshev microstrip end-coupled filter is demonstrated on a polydimethylsiloxane substrate based on high electrically conductive composites made of silver nanoparticle-covered flakes, even with large strain. To achieve a precise design, key microwave parameters such as the impedance, S-parameters, and transmission matrix are defined as a function of strain. This strain vector polar coordinate is used to represent the relationship between the type and the performance of a filter. Then, the most important Chebyshev or quasi-Chebyshev type of filter can be accurately realized by looking up its polar coordinates to find the corresponding strain magnitude and direction of stretching. An end-coupled Chebyshev microstrip bandpass filter with a center frequency of 12.8 GHz and bandwidth of 22% was designed and fabricated for demonstration. Experimentally, at a lateral elongation of 8% and 10.7%, the center frequency decreases by 0.61 and 0.88 dB, respectively, matching the simulation results very well. One potential application for this tunable filter is a front-end module mounted on the biomimetic robot driven by its mechanic movements.
Based on a new topology, a series of single-/dual-wideband bandpass filters (SWB/DWB BPFs) with reconfigurable masses of properties are presented. The proposed design starts from a dual-wideband passive filtering structure, which owns five transmission zeros in the stopbands and three transmission poles in each passband. Then, three capacitors are employed as the tuning elements. By controlling these three capacitors, DWB BPFs with different reconfigurable properties, including three independently tunable passband edges, tunable center frequency of lower passband with fixed absolute bandwidth, tunable bandwidth of lower passband with fixed center frequency, and switchable lower passband, can be realized. In addition, SWB BPF with tunable bandwidth also can be achieved by varying the inserted capacitors. For verification, a prototype with different capacitors is designed and fabricated. As the measured and simulated results agree well with each other, a simple design approach of reconfigurable SWB/DWB BPFs can be verified.
A metal-frame antenna is proposed for mobile applications. The antenna is designed by taking into consideration all the metallic components like front-and-back cameras, telephone receiver, and a steel sheet. The metal-frame and metal-shell of the handset coupled with a strip are used as parts of the antenna. And a tuner is adopted to adjust the resonation frequency of the proposed antenna. The simulated results show that the proposed antenna is able to cover the bandwidth of 0.82–0.96 GHz (GSM) and 1.71–2.96 GHz (DCS/PCS/UMTS/LTE) with acceptable radiation efficiency up to 40%.