The rapid development of populations and the demand in the consumption of concrete is generating the need to produce larger quantities of cement, which brings with it negative effects for the environment. Approximately 0.87 kg of CO2 is produced by the manufacture of cement; In addition, the use of aggregates is generating great concern in the construction industry, due to the costs and the restriction of these. Similarly, the accumulation of construction and demolition waste (RCA) and rice husk ash (RHA) contribute to pollution. Therefore, the objective of this manuscript is to review the literature on the use of RCA and RHA for the elaboration of concrete. For this, indexed articles were used, between the years 2017-2021. The results showed that when 8% RHA is added, the concrete reaches a compressive strength of 70 MPa; as well as, the flexural strength of concrete by adding 50% RCA + 1.50% basalt microfibers was increased by 29.44%. On the other hand, when RHA is added by 15% it reaches a compressive strength of 48.8 MPa; in turn, the mechanical performance at bending with 10% seashell by fine aggregate and 20% RHA by cement, reached a resistance of 65 MPa. Concluding, that the behavior of concrete undoubtedly depends on the proportions of either RCA or RHA; however, the percentages must be no more than 8% and 15% respectively.
25 March 2024 in Innovative Infrastructure Solutions
Wood ash is a residue from the artisanal brick burning process that is produced in the poorest areas of Peru. It is a major problem because there is no management of this type of solid waste and it contaminates large sectors of the population. In this sense, it is important to use sustainable natural elements such as wood ashes that can contribute to the performance of concrete. For this reason, the objective of this research was to evaluate the influence of the incorporation of wood ash on the mechanical properties of concrete, with incorporations of 8%, 12% and 16%, as a function of the weight of cement, for which cylindrical specimens and beams were prepared. The results with respect to slump and unit weight were considerably reduced below their standard samples, unlike the temperature, which had increases that ranged between 3°C. On the other hand, the combined mixture of 8% wood ash resulted in the highest compressive strength, reaching 308,73 kg/cm2 which represents an increase of 9,04% with respect to the standard sample, while the flexural strength was 45,32 kg/cm2 representing an increase of 5,96% with reference to the standard sample. It is concluded that the addition of wood ash significantly improves the mechanical properties of concrete with an optimum dosage of 8%, the result contributes to make it technically feasible as an addition in the elaboration of sustainable concrete in civil construction.
17 January 2024 in Innovative Infrastructure Solutions