The aerodynamic effects of high-speed train running in and out of single-hole single-track and single-hole double-track tunnels and across bridges and tunnels under crosswind are studied by means of train moving model experiment and numerical simulation. The pressure fluctuation amplitude of the train entering and exiting the single-track tunnel is larger than that of the train entering and exiting the double-track tunnel under the crosswind, and the maximum amplitude can reach 2824 Pa. When the train enters or exits the single-track tunnel, the aerodynamic force of the leading carriage is less than that of the double-track tunnel except the yawing moment. Except for the yawing moment, the aerodynamic force of the tail carriage in single-track is greater than that of the double-track tunnel at the stage of the train leaving the tunnel; when the train enters the single-track tunnel, the aerodynamic force is less than that of the double-track tunnel.
An aerodynamic and multi-body dynamic coupling method is proposed and verified to evaluate the coupling effect between a pantograph on a high-speed train and the tunnel resulting from the train’s vibration. The unevenness of the catenary, posture changes of the car body, track irregularities, tunnel effect and the interactions between the air and rods are considered. The influence and the evolution of the car body’s vibration on the service characteristics and responses of the pantograph are described and quantified from multiple perspectives, including the time-domain characteristics of the aerodynamic lift of the panhead, the contact force between the pantograph and catenary, the vertical displacement and vertical acceleration of the contact strip, the frequency-domain characteristics, and the phase diagram of the contact strip. New insights are obtained into the action mechanisms of the car body vibration on the coupling effect between the pantograph and tunnel.
In order to study the large scale flow structure of fire smoke in tunnels, this paper uses the excellent ability of proper orthogonal decomposition for the first time to extract flow field structure, processes the flow field data obtained from numerical simulation, obtains the 2-D and 3-D large-scale flow structure of fire smoke in tunnels and analyzes it. The proper orthogonal decomposition of temperature and velocity pulsation field shows that the proportion of first-order modal energy in temperature field is much higher than that in velocity field, indicating that the flow structure of velocity field is more complex than that of temperature field. Through modal phase analysis and modal decomposition of 3-D flow field, the influence of mode on fire smoke flow is recognized, and the understanding of tunnel fire smoke flow structure is deepened. The low-order mode is closely related to smoke flow. The increase of fire power has little effect on the reconstruction of flow field, and the cross-section energy recovery ratio near the fire source is higher under the same fire power.
12 January 2026 in Tunnelling and Underground Space Technology
Conducting the study on the comfort of high-speed train drivers in a windy environment, this paper based on the logical sequence of "train aerodynamic characteristics - vehicle dynamic response - human biomechanical properties - human body comfort evaluation". Taking the domestic CRH3 high-speed train as the research object. Firstly, the aerodynamic loads acting on the car bodies of the train under different wind speeds and different vehicle speeds were calculated. Then considering the effect of the wheel-rail adhesion and the irregularity of the track line, establish a vibration transfer model of 'rail - wheelset - bogie - carriage - seat', the aerodynamic loads are loaded onto the train to calculate vehicle dynamics and train vibration response under different operating conditions, the vibration characteristics of carriages and seats are obtained. Subsequently, the seat-human vibration transfer model were established and the seat vibration response was introduced into the human dynamics model to calculate the vibration response of different body parts of the driver under different operating conditions. And on the basis which are mentioned above, we summarized the influence rule of wind speed and train speed on human vibration response, From the human body's own point of view, the main factors affecting comfort and the mechanism of action were analyzed. Finally, the comfort standard was integrated to evaluate the comfort of the driver.