Biochar (BC) and magnetite (Fe3O4) nanoparticles (MNP) have both received considerable recent attention in part due to their potential use in water treatment. While both are effective independently in the removal of a range of anionic metals from aqueous solution, the efficacy of these materials is reduced considerably at neutral pH due to decreased metal adsorption and MNP aggregation. In addition to synthetic metal oxide–biochar composites for use in treatment and remediation technologies, aggregates may also occur in nature when pyrolytic carbon is deposited in soils. In this study, we tested whether magnetite synthesized in the presence of biochar leads to increased removal efficiency of hexavalent chromium, Cr(VI), at the mildly acidic to neutral pH values characteristic of most natural and contaminated aqueous environments. To do so, magnetite nanoparticles and biochar produced from ground willow were synthesized to form composites (MNP–BC). Batch studies showed that MNP–BC markedly enhanced both adsorption and reduction of Cr(VI) from aqueous solution at acidic to neutral pH as compared to MNP and BC separately, suggesting a strong synergetic effect of hybridizing Fe3O4 with BC. Mechanistically, the Cr(VI) removal processes occurred through both adsorption and intraparticle diffusion followed by reduction to Cr(III). Synchrotron-based X-ray absorption spectroscopy analyses confirmed that Cr(VI) was reduced at the surface of MNP–BC, with electrons derived directly from both biochar and magnetite at low pH, while at near-neutral pH, biochar increased Cr(VI) reduction by inhibiting MNP aggregation. Extended X-ray absorption fine structure fitting results confirmed that the Cr(III) precipitates consist of Cr(OH)3 and chromite (Cr2FeO4) nanoparticles. Our results demonstrate that MNP–BC composites have great potential as a material for the treatment of chromate-containing aqueous solutions across a wide range of pH values, and provide information valuable broadly relevant to soils and sediments that contain biochar.
1 January 2025 in Environmental Science: Processes & Impacts
REE fluxes from rivers into the Hudson Bay and Atlantic Ocean in Quebec reveal regional contrasts, with fluxes to the Atlantic 2.7 times higher, partly due to erosion. REE levels were influenced by dissolved organic carbon, iron, pH and temperature.
The dynamics of sediment phosphorus (P) remobilization and recycling in many polymictic systems due to distinct external and internal loading conditions are poorly understood. Here we used a multifaceted approach of quantifying sediment P binding forms and corresponding metal contents in sediment cores down to 30 cm from 8 different locations at Lake of Woods (LOW) in different seasons. We also measured pH, redox potential and dissolved oxygen uptake across the sediment-water interface and the concentration of nutrient and metals in pore water at different depths. Additionally, we applied a reaction-transport diagenetic model to construct the spatial and temporal trend of internal P loading in response to environmental variations. The summer diffusive fluxes of P ranged between 3 and 83 µmol m-2 d-1 whereas the winter fluxes were lower ranged from 0.1 to 0.35 µmol m-2 d-1. P recycling efficiency were 13% to 77%. P bound to redox sensitive iron (Fe)-P binding forms in sediments were the major source of P release in all stations, while P immobilization is controlled by redox-insensitive calcium (Ca)-P phases. The modeling results supported the notion that P release was mostly driven by the diagenetic recycling of redox sensitive and organic bound P.