We demonstrate electrical spin injection into a light-emitting diode from the remanent state of ferromagnetic contacts in perpendicular geometry. Using a multilayer structure with perpendicular magnetic anisotropy and a reverse-biased Schottky contact, we achieve a circular polarization degree of the emitted light of 0.75% at .
4 April 2008 in IEEE Journal of Selected Topics in Quantum Electronics
Two-color semiconductor external cavity laser concepts for terahertz (THz) generation are discussed. By defining three critical characteristics, various two-color laser configurations are experimentally classified with respect to the application of THz generation. According to our experimental results, we suggest a new two-color laser configuration. It is based on an external cavity with an etalon.
We use photorefractive two-wave mixing for coherent amplification of the object beam in digital holographic recording. Both amplitude and phase reconstruction benefit from the prior amplification as they have an increased SNR. We experimentally verify that the amplification process does not affect the phase of the wavefield. This allows for digital holographic phase analysis after amplification. As the grating formation in photorefractive crystals is just driven by coherent light, the crystal works as a coherence gate. Thus the proposed combination allows for applying digital holography for imaging through scattering media, after the image bearing light is coherence gated and filtered out of scattered background. We show experimental proof-of principle results.
We analyze the electrical injection of spin-polarized electrons into a (GaIn)As∕GaAs light-emitting diode. Using an Fe∕Tb multilayer structure with perpendicular magnetic anisotropy and a reverse-biased Schottky contact, we demonstrate spin injection even in remanence between 90 and 260K. The maximum degree of circular polarization of the emitted light is 0.75% at 90K.
We demonstrate a method to select different layers in a sample using a low coherent gating approach combined with a stable common-path quantitative phase imaging microscopy setup. The depth-filtering technique allows us to suppress the negative effects generated by multiple interference patterns of overlaying optical interfaces in the sample. It maintains the compact and stable common-path setup, while enabling images with a high phase sensitivity and acquisition speed. We use a holographic microscope in reflective geometry with a non-tunable low coherence light source. First results of this technique are shown by imaging the hardware layer of a standard micro-controller through its thinned substrate.
The application of optical methods for tissue diagnosis, activation, and treatment suffers dramatically from the low accessible depths due to strong light scattering in tissues. Here we demonstrate a method to address this issue by utilizing transient ultrasound waves, travelling transversally to the light propagation direction, to guide light into deeper tissue regions. We study the formation of the ultrasound-induced refractive index structures and waveguides using simple ultrasound field configurations and analyze their effects on the propagation of short light pulses. As a proof of concept, we demonstrate using 5 ns pulses of 532 nm light and Intralipid-20%-based phantoms with $$\mu _{\mathrm{s}}^\prime$$ up to 4.5 cm−1a waveguide supported light intensity increase up to the depths of at least 90 mean free paths.