Electrochemical machining (ECM) is an important technology in machining difficult-to-cut materials and to shape free-form surfaces. In ECM, material is removed by electrochemical dissolution process, so part is machined without inducing residual stress and without tool wear. To improve technological factors in electrochemical machining, introduction of electrode tool ultrasonic vibration is justifiable. This method is called as ultrasonically assisted electrochemical machining (USAECM). In the first part of the paper, the analysis of electrolyte flow through the gap during USAECM has been presented. Based on computational fluid dynamic methods, multiphase, turbulent and unsteady electrolyte flow between anode and cathode (under assumption that cavitation phenomenon occurs) has been analysed. Discussion of the obtained solutions is the base to define optimal conditions of electrolyte flow in case of USAECM process. The second part of the paper is connected with experimental investigations of USAECM process. Classic experimental verification of obtained results in case of machining is extremely difficult, but influence of the ultrasonic vibration can be observed indirectly by changes in technological factors (in comparison to machining without ultrasonic intensification), whereas results of numerical simulation give possibility to understand reason and direction of technological factors changes. Investigations proved that ultrasonic vibrations change conditions of electrochemical dissolution and for optimal amplitude of vibration gives possibility to decrease the electrode polarisation.
One of the most effective way of electrochemical machining (ECM) accuracy increase is to carry out process with application of voltage pulses. In one of the variants of ECM, ultra short (nono- or picosecond range) voltage pulses are applied. It gives possibility to achieve high localization of electrochemical dissolution process and allows to machine microparts with accuracy less than 0.01 mm. However, because of the process principles, this variant of ECM has number of limitations which stop its wider application in micromanufacturing industry. Based on the literature review, the physical principles of ultrashort voltage pulses electrochemical machining were presented and anodic dissolution localization issues were discussed. Also, differences between other electrochemical machining variants were underlined. It gave possibility to identify limitations and future perspectives of industrial applications.
Electrochemical machining is an unique method of shaping in which, for optimal parameters tool has no wear, surface layer properties after machining are similar to the core material and surface quality and accuracy increase together with material removal rate increase. Such advantages of electrochemical machining, besides of some ecological problems, create industry interest in the range of manufacturing elements made of materials with special properties (i.e. turbine blades of flow aircrafts engines). In the paper the nowadays possibilities and recent practical application of electrochemical machining in aircraft have been presented.
1 June 2017 in Management and Production Engineering Review
Recent dynamic development of abrasive hybrid manufacturing processes results from application of a new difficult for machining materials and improvement of technological indicators of manufacturing processes already applied in practice. This tendency also occurs in abrasive machining processes which are often supported by ultrasonic vibrations, electrochemical dissolution or by electrical discharges. In the paper we present the review of new results of investigations and new practical applications of Abrasive Electrodischarge (AEDM) and Electrochemical (AECM) Machining.