Machining of high strength and shock-absorbent Metal Fiber Laminate (MFL) becomes inevitable to attain the geometric shape and size, as to validate the functionality in various impact protection environments. A class of titanium metal laminate alternatively interleaved with high strength basalt and shock absorbing flax fibers have been machined with an abrasive water jet method. Machining experiment trials with WJP-water jet pressure, TS-traverse speed, SOD-stand-off distance, and AMFR-abrasive flow rate and parametric optimization on quality factors of surface roughness (Ra) and kerf ratio (KR) were done using a Central Composite Design (CCD)-Response Surface Methodology (RSM). Experimental investigation reveals that the surface roughness and kerf ratio significantly decreased by 27.59% and 9.16% as water jet pressure was increased to peak value. Similarly, abrasive mass flow rate raised to its higher value, the Ra and KR slightly decreased by a margin of 6.5% and 2.5%. However, a reverse effect on surface roughness and kerf ratio was observed as an increase of SOD and TS. Surface topology analysis reveals that the material removal mechanism of the Ti sheet is shear plastic deformation with plowing marks, that of basalt fiber is brittle fracture with micro-chipping, and that of flax fiber is bulk machining.
26 November 2021 in Materials and Manufacturing Processes
Inconel-625 is a tough-to-cutting material used in ultra-supercritical power plants for flanges, offshore oil sectors, and turbine blades, among other high-temperature components. The objective of this article is to determine the link between four key process independent variables: traverse speed (TSP), abrasive mass flow rate (AMFR), abrasive aqua jet pressure (AAJP), and gap distance (Gd) to the surface roughness (SRa), kerf angle (KEA), and erosion rate (MRR). The response surface methodology-Central composite design (RSM-CCD) was used to perform the experimental interpretations. The influence of individual abrasive aqua jet cutting (AAJC) factors was determined using analysis of variance technique (ANOVA). It was found that AAJP is the dominant factor in the responses. When the AAJP reached its maximum value of 300 MPa, the SRa and KEA reduced by 27.19% and 13.83%, respectively, the MRR improved by 23.71%. The Desirability analysis is handled to optimize the AAJC parameters of Inconel-625. The optimal values of parameters obtained were 300 MPa AAJP, 75 mm/min TSP, 2.4 mm Gd, and 0.55 kg/min AMFR to minimize SRa, KEA, & maximize the MRR. The scanning electron microscope is used to examine the surface morphology and erosion mechanisms.
The structural porosity weakness of a natural flax fiber-layered polymer laminate was reduced by the spatial rearrangement of natural almond shell filler occupying preferentially porous sites between the stacking layers, improving the properties of the polymer laminate. The present work investigates the mechanical, thermal, and free vibrational behavior of composites, including surface modification and the effect of almond shell filler loading in the flax fiber intertwined composites. Alkaline treatment of natural flax fiber and almond shell filler effectively reduced the hydrophilic contents of hemicellulose, lignin, and wax without altering the cellulose nature, as confirmed by FTIR analysis. Tensile strength was 35% higher for the alkaline-treated 10% almond shell-filled composite than the untreated filler composite. However, the tensile strength decreased beyond 10% of filler loading because of the poor dispersion of fillers in the matrix. As evident in the 10% filled almond shell composite, due to stronger interaction, polymer-mixed almond fillers act as a thermal insulating layer between the flax stacks, increasing thermal stability. Alkali treatment with an almond shell of 10 wt% filled flax fiber composite exhibited a higher natural frequency (185 Hz) and damping value (0.042) due to total internal dissipation of dynamic forces.
7 September 2023 in Biomass Conversion and Biorefinery