The use of multirotor unmanned aerial vehicles (UAV), which can take-off and landing vertically, is gradually expanding. Although there are many types of these vehicles with standard configuration, non-standard configurations may be required for special purposes usage. So, an octocopter UAV with asymmetric configuration is proposed in this study. In particular, this asymmetrically configured octocopter is intended to be used for imaging or mapping purposes, and may be a solution to widen the viewing angle of the camera or any sensor placed on the vehicle, especially in the use of multiple cameras and sensors. The mathematical model of this proposed UAV system was obtained and the trajectory tracking was performed using PID control method. The control parameters of the controller were determined using Grey Wolf Optimizer (GWO). Considering the propellers determined in two different sizes due to its asymmetrical structure, it has been observed that the proposed UAV performs a satisfactory trajectory tracking.
In this study, a legged and wheeled robot model was proposed for cleaning the glass of greenhouses. The robot has four wheels and four legs, each with three degrees of freedom (DOF). The design, kinematic analysis and simulation of the robot was carried out. Glass greenhouses are created by placing glass sheets on T-shaped iron bars arranged in parallel at certain intervals. The robot performs the glass cleaning task by performing two different movements on greenhouse roof. As a first movement, the robot moves like a train moving on the rail on iron bars with wheels, cleaning the glass as it travels. After cleaning the glasses placed between two iron bars along a column, as second movement, the robot passes the next column using legs. These two movements continue until the entire roof of the greenhouse is cleaned. Kinematic analysis of this robot, which is designed with mechanical properties that can make these movements, has been made. Walking simulation of the robot was carried out according to the kinematic analysis. The simulation results showed that this proposed robot can be used to clean glass on the greenhouse roof.