Adolfo Bucio Galindo

Dr. Adolfo Bucio Galindo


Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 February 2021 in Coatings
Verified
Journal Article
Open access
PDF file
AGAdolfo Bucio Galindo
Adolfo Bucio Galindo
RMRosario Moreno-Tovar
Rosario Moreno-Tovar
LBLauro Bucio
Lauro Bucio
JEJessica Espinosa-Dávila
Jessica Espinosa-Dávila
FAFrancisco Anguebes-Franceschi
Francisco Anguebes-Franceschi
A study on the physical and mechanical properties of beeswax (BW), candelilla wax (CW), paraffin wax (PW) and blends was carried out with the aim to evaluate their usefulness as coatings for cheeses. Waxes were analyzed by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), differential scanning calorimetry (DSC), permeability, viscosity, flexural and tensile tests and scanning electron microscopy. Cheeses were coated with the waxes and stored for 5 weeks at 30 °C. Measured parameters were weight, moisture, occurrence and degree of fractures, and dimensional changes. The crystal phases identified by XRD for the three waxes allowed them to determine the length of alkanes and the nonlinear compounds in crystallizable forms in waxes. FTIR spectra showed absorption bands between 1800 and 800 cm−1 related to carbonyls in BW and CW. In DSC, the onset of melting temperature was 45.5 °C for BW, and >54 °C for CW and PW. Cheeses coated with BW did not show cracks after storage. Cheeses coated with CW and PW showed microcraks, and lost weight, moisture and shrunk. In the flexural and tensile tests, BW was ductile; CW and PW were brittle. BW blends with CW or PW displays a semi ductile behavior. Cheeses coated with BW blends lost less than 5% weight during storage. The best waxes were BW and the blends.

1 August 2006 in Food Microbiology
Verified
Journal Article
Closed access
AGAdolfo Bucio Galindo
Adolfo Bucio Galindo
RHRalf Hartemink
Ralf Hartemink
JSJohan W. Schrama
Johan W. Schrama
JVJohan Verreth
Johan Verreth
FRFrans M. Rombouts
Frans M. Rombouts

1 January 2005 in The Journal of General and Applied Microbiology
Verified
Journal Article
Open access
PDF file
AGAdolfo Bucio Galindo
Adolfo Bucio Galindo
RHRalf Hartemink
Ralf Hartemink
JSJohan W. Schrama
Johan W. Schrama
JVJohan Verreth
Johan Verreth
FRFrank M. Rombouts
Frank M. Rombouts
A good probiotic strain should be able to survive the conditions of handling and storage to be delivered in high concentration to the host. That is especially important when stressful conditions are prevalent in the carrier, for instance in low water content foods like animal feed. The aim of this research was to study the survival of the probiotic candidate Lactobacillus plantarum 44a after spraying and drying in feed, and during storage and exposure to gastrointestinal tract fluids in vitro. In addition, the viability of the strain during exposure to distilled water and 2% NaCl was studied. Feed was sprayed with a suspension of ≈2×1010 CFU of L. plantarum 44a in 10, 15, 20, 25 and 30% v/w of the feed and dried to constant weight (6% moisture) in a convective oven at 25°C. L. plantarum 44a survived 14.67, 36, 51.86, 78.9 and 105.3% respectively in relation to the original % v/w of the feed. After 3 weeks of storage at 25°C, survival was similarly low in all the treatments. L. plantarum 44a stored in feed containing 13% moisture, vacuum-packaged and stored in refrigeration, maintained high viability (≈100%) after 1 year of storage. Survival was not affected after feed-containing lactobacilli was exposed to gastrointestinal fluids in a simulation model. Viability of L. plantarum 44a as a cell suspension in PBS added directly to distilled water or distilled water with 2% NaCl was maintained up to 48 h; after 72 h, viability started to decline. It is concluded that L. plantarum 44a maintained high viability after being dried and stored in feed even after exposure to gastric and intestinal fluids in vitro.

19 June 2023 in Agro Productividad
Verified
Journal Article
Open access
PDF file
AGAdolfo Bucio Galindo
Adolfo Bucio Galindo
LVLiliana Yanet Lopez Velazquez
Liliana Yanet Lopez Velazquez
GEGonzalo Canché Escamilla
Gonzalo Canché Escamilla
Objective: To analyze the recent contributions of bioplastics in addressing environmental problems caused by plastic pollution. Design/Methodology/Approach: A literature review was carried out on the definitions of plastics and bioplastics, the sources of raw materials, processing technologies and methods to assess biodegradation. Current practices for final disposal and/or reuse were also examined. Special emphasis was placed on polylactic acid (PLA), one of the most widely used biodegradable materials today. Results: Over the years, there have been significant developments in the definitions of plastics and bioplastics, as well as in the sources of raw materials and processing technologies used to create final plastic products. By using bioplastics instead of conventional plastics, it is possible to reduce the dependence on petroleum and mitigate the pollution associated with plastic production and disposal. Furthermore, the enhanced biodegradability of bioplastics ensures that they break down more readily in natural environments, reducing the accumulation of plastic waste and its detrimental impact on ecosystems. The production of bioplastics using plant fibers, biological materials, and polymeric waste materials presents an opportunity for integration into the productive activities of the agro-industrial sector. This integration brings several benefits and synergies between agriculture and industry. Study limitations/Implications: We provide a report based on the literature. Findings/Conclusions: there is a notable current trend in the utilization of bioplastics as a viable substitute for conventional plastics. In order to assess the biodegradability and compostability of these materials, specific testing and certification standards have been established by reputable organizations. These standards serve as a reliable framework for evaluating the environmental impact and degradation characteristics of bioplastics. By adhering to these guidelines, manufacturers can ensure that their bioplastic products meet the necessary criteria for sustainable use.