Sujie Chang

Dr. Sujie Chang

School of Materials Science and Engineering, Shandong Jianzhu University
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2021 in Crystals
Verified
Journal Article
Open access
PDF file
SCSujie Chang
Sujie Chang
Yuanhua SangYuanhua Sang
Yuanhua Sang
Hong LiuHong Liu
Hong Liu
Band structure engineering and heterojunction photocatalyst construction are efficient approaches to improve the separation of photo-induced electrons and holes, along with enhancing light response ability. By sulfur doping, sodium tantalite (NaTaO3) showed an improved photocatalytic property for the degradation of Rhodamine B (RhB). Sn3O4 nanoflakes were constructed on the surface of NaTaO3 nanocubes, forming a surface heterostructure via a simple hydrothermal process, initially. This heterostructure endows the photocatalyst with an enhanced charge separation rate, resulting in an improved photocatalytic degradation of RhB. Moreover, a possible mechanism over Sn3O4/NaTaO3 and the photodegradation pathway of RhB were proposed as the combined effect of photo-induced electrons and holes. This facile process for band structure engineering and heterostructure construction provides the possibility for the practical application of high-efficiency photocatalysts.

10 January 2025 in Coatings
Verified
Journal Article
Open access
PDF file
SCSujie Chang
Sujie Chang
YWYuanHao Wang
YuanHao Wang
JWJianpeng Wang
Jianpeng Wang
ZHZerui Hao
Zerui Hao
YYYang Yang
Yang Yang
LSLei Shi
Lei Shi
In this study, pre-treated low-carbon steel substrates were electroplated with Zinc–Nickel (ZN) alloy composite coatings enhanced by the incorporation of nano-silicon dioxide (SiO2) particles in an alkaline solution. ZN deposits with varying concentrations of nano-SiO2—specifically, 1, 2, 3, 5, and 10 wt%—were achieved by adjusting the ratio between the nano-SiO2 and ZN alloy electroplating solutions. The influence of the nano-SiO2 content on both the quality of the coating and its corrosion behavior was investigated in detail. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an atomic force microscope (AFM) were utilized to assess the surface, cross-section structure, elemental composition, and thickness of the coatings. Notably, the addition of nano-SiO2 improved the microstructure of the coating, leading to a reduction in grain size as well as enhancements in uniformity and density while revealing that co-deposition reached an optimal concentration at 3 wt% nano-SiO2. The corrosion behavior of coated specimens was evaluated through electrochemical impedance spectroscopy (EIS) and polarization techniques within a 3.5 wt% NaCl solution serving as a corrosive medium. Specifically, for typical prepared coatings, the corrosion current density decreased from 1.410 × 10−4 A·cm−2 to 5.762 × 10−6 A·cm−2, which is a remarkable reduction by one to two orders of magnitude relative to the SiO2-free coatings mentioned previously. These findings provide a straightforward approach for selecting 3 wt% nano-SiO2 as an effective additive in ZN composite coatings.

21 September 2022 in Coatings
Verified
Journal Article
Open access
PDF file
XWXiaomin Wang
Xiaomin Wang
JPJing Pan
Jing Pan
QLQing Li
Qing Li
XDXiaojun Dong
Xiaojun Dong
LSLei Shi
Lei Shi
SCSujie Chang
Sujie Chang
In this work, MnO2/TiO2 coating on metallic porous titanium was prepared through a hydrothermal-based chemical method, followed by a chemical precipitation reaction of KMnO4 and MnSO4 aqueous solutions. The surface of the MnO2/TiO2/Ti was uniform and compact, with a high load capacity. The corrosion resistance and electrochemical properties of the MnO2/TiO2/Ti coating were investigated in comparison with those of pure Ti and TiO2 coatings. Cyclic voltammetry and constant current charge–discharge measurements showed that the MnO2/TiO2/Ti electrode presented good electrochemical performance. The MnO2/TiO2/Ti electrode had the highest capacitor performance compared to the other electrodes, and the nano-MnO2 coating significantly decreased the corrosion current densities. The nano-MnO2 coating exhibited excellent anti-corrosion properties at room temperature and better capacitance performance compared with pure Ti and TiO2 coatings. After surface modification, TiO2/Ti-coated MnO2 had better electrochemical behavior and significantly improved corrosion resistance than the TiO2/Ti nanocomposites. Its specific capacitance reached 314 F/g, which was 3.5 times that of the TiO2/Ti electrode material.

17 February 2022 in Crystals
Verified
Journal Article
Open access
PDF file
SCSujie Chang
Sujie Chang
XWXiaomin Wang
Xiaomin Wang
QHQiaoling Hu
Qiaoling Hu
XSXigui Sun
Xigui Sun
AWAiguo Wang
Aiguo Wang
QSQilei Sun
Qilei Sun
Self-assembled nanocomposites are attracting considerable attention owing to their controllable architectures and self-assembly processes, as well as the increase in worldwide environmental effects and energy needs. Further understanding of the self-assembly procedure for improving environmental and energy applications would advance the design and manufacture of nanomaterials for various applications. These materials can be grouped into major categories for various application fields, including powder photocatalysts, membrane photocatalysts, and thin-film thermoelectric nanomaterials. These self-assembled nanomaterials can be used for environmental and energy applications, such as wastewater purification, hydrogen production by water splitting, energy storage, and energy harvesting. In this review, a brief introduction to the definitions and classifications of self-assembled nanocomposites is provided. We aim to provide a summary of the recent research related to self-assembled nanocomposites and nanostructures used for environmental and energy applications. Moreover, typical examples and discussions are aimed at demonstrating the advantages of self-assembled nanostructures. At the end of each section, the structural properties and the application of the nanocomposite or nanostructure are summarized. Finally, we provide perspectives for future research on the design and fabrication of self-assembled nanocomposites and nanostructures.

25 May 2025 in Coatings
Verified
Journal Article
Open access
PDF file
FCFan Cao
Fan Cao
SYShumei Yao
Shumei Yao
MMMeng xiaowen Meng
Meng xiaowen Meng
JWJianpeng Wang
Jianpeng Wang
SCSujie Chang
Sujie Chang
LSLei Shi
Lei Shi
The novel pyridine oxime-based complexing agents 2-pyridinecarboxaldehyde oxime, 2-acetylpyridine ketoxime and 2-pyridine amidoxime were synthesized for alkaline Zn-Ni alloy electrodeposition, outperforming conventional citrate/TEPA systems in corrosion resistance and microstructural control. The N,O-bidentate chelation mechanism governs metal ion reduction kinetics via diffusion-limited pathways, enabling γ-phase Ni5Zn21 intermetallic formation and nanocrystalline refinement. Electrochemical and microstructural analyses demonstrate suppressed random nucleation and hydrogen evolution side reactions, leading to enhanced charge transfer resistance and reduced corrosion current density. Notably, 2-pyridine amidoxime achieves ultrasmooth surfaces through defect-free nanocluster growth, while 2-pyridinecarboxaldehyde oxime maximizes γ-phase crystallinity. The synergy between grain boundary density and surface integrity establishes a dual protection mechanism combining barrier layer formation and active dissolution suppression. This work advances microstructure engineering via coordination chemistry, offering a breakthrough over traditional zincate electroplating for high-performance anti-corrosion coatings.

27 July 2022 in Ferroelectrics
Verified
Journal Article
Closed access
XWXiaomin Wang
Xiaomin Wang
YCYifei Chen
Yifei Chen
CWChenxi Wu
Chenxi Wu
YHYuting He
Yuting He
LSLei Shi
Lei Shi
BLBin Liu
Bin Liu
Passivation is carried out on the basis of low chromium or no chromium. This paper has prepared a nontoxic passivation agent suitable for building door and window hardware. Its formula is sodium molybdate, cobalt nitrate, phytic acid, sodium citrate, phosphoric acid sodium. The content of each component was determined by the single variable factor experiment method, the corrosion resistance was measured by electrochemical workstation, the surface morphology and coating thickness of the passive film were observed and analyzed by JSM-6380LA scanning electron microscope (SEM), and the German Brook D8 Advance diffractometer was used. The composition of the passivation film was analyzed, and the corrosion resistance of the passivation film was tested in a salt spray test box. Finally, the optimal formula of the chromium-free blue and white passivation agent was sodium molybdate 40 g/L, sodium phosphate 20 g/L, sodium citrate. 15 g/L, phytic acid 10 ml/L, cobalt nitrate 1.5 g/L, PH value 1-2, passivation time 8–20 s. The prepared passivation used this nontoxic passivation agent can reaches 72 h in the neutral salt spray test. This work provides a new idea for the development of nontoxic passivation agent, and it has potential commercial value