This paper proposes a dual three-level, T-type, neutral-point clamped (T-NPC) inverter fed dual permanent magnet synchronous motor topology for low-voltage, high-power traction applications. The switching pulses of the T-NPC inverters are interleaved and controlled, such that they produce equal and opposite three-phase currents at their output. This maintains balanced dc-link voltages in steady-state and transient conditions, even with slight mismatches between two sets of three-phase loads. Thus, the proposed configuration decouples the modulation strategy from the capacitor balancing control. Simulation and experimental results demonstrate that in comparison to the conventional single T-NPC inverter, the proposed topology reduces dc-link capacitors' voltage deviation and current stress by more than 90% while avoiding additional switching instances to balance capacitor voltages.
8 February 2017 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Conventional three-level discontinuous pulsewidth modulation (DPWM) templates typically provide maximum switching loss reduction capability for load power factor angles in the range from 30° lagging to 30° leading. This paper proposes three space-vector-based DPWM templates for lower power factors and a generalized DPWM strategy for three-level inverters operating with modulation indices lower than 0.5. For different power factors, the proposed strategy adapts the inverter pulse sequence by combining different portions of the proposed and conventional DPWM templates within one operating fundamental cycle and ensures minimum switching instances when changing templates. Consequently, the strategy aligns the PWM clamping intervals with the respective load-current peaks, achieving around 50% switching loss reduction capability extended to all operating power factor angles (90° lagging to 90° leading). The simulation and experimental results demonstrate the effectiveness of the proposed three-level generalized DPWM strategy over the conventional three-level modulation strategies.
This paper analytically discusses various factors that affects static wireless charging of an electric vehicle and also presents the maximum efficient operating regime of this wireless power transfer. The main goal of this paper is using magnetic resonance to supply power wirelessly via air and to determine the dependency of power supply on coil dimensions and other factors. Different types of source and load coils are analyzed like circular, spiral and helical. Different shapes of the coils are also taken into account like square and circular. From the analysis, it is found that the efficiency of power transfer is derivable by the equivalent circuit point of view and also using coupled mode theory. The analysis shows that the efficiency is dependent on the coil radius, distances between the coils and the Q-factors of the coils. From the analysis, an overview of the optimum design of the coils and distance between the coils has been given.
6 June 2017 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The output current ripple of an inverter shows different variations for sub-fundamental operating cycle and over few fundamental cycles. This paper investigates subfundamental cycle peak-peak current ripple variation of a three-level three-phase inverter over the entire operating modulation index range for the three-level continuous and discontinuous pulsewidth modulation strategies. Furthermore, based on the analytical current ripple variation, a strategy is presented to change the switching frequency within a fundamental cycle while maintaining the peak-peak current ripple similar to the conventional fixed switching frequency strategies. The strategy has been implemented and experimentally validated on a permanent-magnet synchronous motor drive. The results demonstrate that the proposed strategy reduces inverter switching instances and associated losses around 10-30%.
This paper proposes reduced switching random PWM (RPWM) techniques based on Space Vector PWM (SVPWM) technique for conventional two-level inverters. In the proposed RPWM techniques, the switching frequency is randomized within a band lower than the nominal switching frequency at and around the peaks of the three-phase output currents. For the rest of the fundamental cycle, the switching frequencies are randomly selected within a band higher than the nominal switching frequency. The proposed method is able to spread the narrowband harmonic clusters similar to the conventional RPWM techniques and additionally produce less inverter output current distortion than conventional spread spectrum techniques. The proposed technique has been analyzed and has been verified using experimental results.
This paper studies the dual three-phase inverter configuration for an electric vehicle drive feeding a dual three-phase permanent magnet synchronous machine. Employing interleaved SVPWM and DPWM modulation techniques with the proposed configuration, the input capacitor ripple current has been substantially reduced to 50-60 % compared to that of a conventional 2-level VSI. The optimal interleaving angles have been identified for capacitor ripple reduction considering both modulation indexes and power factors pertaining to the traction motor's operating range. The dual three-phase inverter's switching losses have been analyzed for two different DC-link voltages and output power levels and a 15-20% reduction in switching loss has been noted.