With the improvement in technology, additive manufacturing using metal powder has been a go-to method to produce complex-shaped components. With complex shapes being printed, the residual stresses (RS) developed during the printing process are much more difficult to control and manage, which is one of the issues seen in the field of AM. A simplified finite element-based, layer-by-layer activation approach for the prediction of residual stress is presented and applied to L-shaped samples built in two different orientations. The model was validated with residual stress distributions measured using neutron diffraction. It has been demonstrated that this simplified model can predict the trend of the residual stress distribution well inside the parts and give insight into residual stress evolution during printing with time for any area of interest. Although the stress levels predicted are higher than the measured ones, the impact of build direction on the development of RS during the building process and the final RS distributions after removing the base plate could be exploited using the model. This is important for finalizing the print orientation for a complex geometry, as the stress distribution will be different for different print orientations. This simplified tool which does not need high computational power and time can also be useful in component design to reduce the residual stresses.

Additive manufacturing (AM) of parts using a layer by layer approach has seen a rapid increase in application for production of net shape or near-net shape complex parts, especially in the field of ...

Components with complex features that are designed with their function as a core aspect often are not viable to be manufactured with traditional methods. This has been a bottleneck in the past, lea ...