This paper presents a wearable upper body exoskeleton system with a model-based compensation control framework to support robot-aided shoulder-elbow rehabilitation and power assistance tasks. To eliminate the need for EMG and force sensors, we exploit off-the-shelf compensation techniques developed for robot manipulators. Thus, target rehabilitation tasks are addressed by using only encoder readings. A proof-of-concept evaluation was conducted with live able-bodied participants. The patient-active rehabilitation task was realized via observer-based user torque estimation, in which resistive forces were adjusted using virtual impedance. In the patient-passive rehabilitation task, the proposed controller enabled precise joint tracking with a maximum positioning error of 0.25°. In the power assistance task, the users' muscular activities were reduced up to 85% while exercising with a 5 kg dumbbell. Therefore, the exoskeleton system was regarded as being useful for the target tasks, indicating that it has a potential to promote robot-aided therapy protocols.

This paper proposes a new nonlinear stability analysis for the acceleration-based robust position control of robot manipulators by using disturbance observer (DOb). It is shown that if the nominal inertia matrix is properly tuned in the design of a DOb, then the position error asymptotically goes to zero in regulation control and is uniformly ultimately bounded in trajectory-tracking control. As the bandwidth of a DOb and the nominal inertia matrix are increased, the bound of error shrinks, i.e., the robust stability and performance of the position control system are improved. However, neither the bandwidth of the DOb nor the nominal inertia matrix can be freely increased due to practical design constraints, e.g., the robust position controller becomes more noise-sensitive when they are increased. The proposed stability analysis provides insights into the dynamic behavior of DOb-based robust motion control systems. It is theoretically and experimentally proved that nondiagonal elements of the nominal inertia matrix are useful in improving the stability and in adjusting the tradeoff between robustness and noise sensitivity. The validity of the proposal is verified by simulation and experimental results.

The science and technology of wearable robots are steadily advancing, and the use of such robots in our everyday life appears to be within reach. Nevertheless, widespread adoption of wearable robots should not be taken for granted, especially since many recent attempts to bring them to real-life applications resulted in mixed outcomes. The aim of this article is to address the current challenges that are limiting the application and wider adoption of wearable robots that are typically worn over the human body. We categorized the challenges into mechanical layout, actuation, sensing, body interface, control, human–robot interfacing and coadaptation, and benchmarking. For each category, we discuss specific challenges and the rationale for why solving them is important, followed by an overview of relevant recent works. We conclude with an opinion that summarizes possible solutions that could contribute to the wider adoption of wearable robots.

In this paper, we introduce our ongoing work on the development of an upper body exoskeleton robot, driven by a pneumatic-electric hybrid actuation system. Since the limb of an exoskeleton robot needs to have small inertia to achieve agility and safety, using a heavy actuator is not preferable. Furthermore, we need to use backdrivable actuators that can generate sufficiently large torques to support user movements. These two requirements may seem contradictory. In order to cope with this development problem, we use a hybrid actuation system composed of Pneumatic Artificial Muscles (PAMs) and small-size electromagnetic motors. Although we and other research groups have already presented the advantage of the hybrid actuation system, we newly propose the usage of Bowden cable in a hybrid actuator to transmit the force generated by the PAMs to joints of our exoskeleton robot so that we can design a compact upper limb with small inertia. In addition, small size electric motors are mechanically connected to joints in order to compensate uncertainty generated by the PAM dynamics and the Bowden cable. We demonstrate that the proposed joint is backdrivable with the capability of large torque generation for the gravity compensation task both in One-DOF system with a dummy weight and right arm of the upper body exoskeleton with a mannequin arm. We also show the right arm exoskeleton can be moved using a torque input, extracted from sensory information via a goniometer.

This paper proposes a real-time balance control technique that can be implemented to bipedal robots (exoskeletons, humanoids) whose ankle joints are powered via variable physical stiffness actuators. To achieve active balancing, an abstracted biped model, torsional spring-loaded flywheel, is utilized to capture approximated angular momentum and physical stiffness, which are of importance in postural balancing. In particular, this model enables us to describe the mathematical relation between zero moment point (ZMP) and physical stiffness. The exploitation of variable physical stiffness leads to the following contributions: 1) Variable physical stiffness property is embodied in a legged robot control task, for the first time in the literature to the authors' knowledge. 2) Through experimental studies conducted with our bipedal exoskeleton, the advantages of variable physical stiffness strategy are demonstrated with respect to the optimal constant stiffness strategy. The results indicate that the variable stiffness strategy provides more favorable results in terms of external disturbance dissipation, mechanical power reduction, and ZMP/center of mass position regulation.

This paper presents a trajectory generator and an active compliance control scheme, unified in a framework to synthesize dynamic, feasible and compliant trot-walking locomotion cycles for a stiff-by-nature hydraulically actuated quadruped robot. At the outset, a CoP-based trajectory generator that is constructed using an analytical solution is implemented to obtain feasible and dynamically balanced motion references in a systematic manner. Initial conditions are uniquely determined for symmetrical motion patterns, enforcing that trajectories are seamlessly connected both in position, velocity and acceleration levels, regardless of the given support phase. The active compliance controller, used simultaneously, is responsible for sufficient joint position/force regulation. An admittance block is utilized to compute joint displacements that correspond to joint force errors. In addition to position feedback, these joint displacements are inserted to the position control loop as a secondary feedback term. In doing so, active compliance control is achieved, while the position/force trade-off is modulated via the virtual admittance parameters. Various trot-walking experiments are conducted with the proposed framework using HyQ, a ~ 75kg hydraulically actuated quadruped robot. We present results of repetitive, continuous, and dynamically equilibrated trot-walking locomotion cycles, both on level surface and uneven surface walking experiments.